Belle POWER PACKS 20-110D Bedienungshandbuch Seite 21

Problem
pressure low.
hot or loose.
Engine speed remains P.O.D. Cylinder seized in retracted position.
at idle when tools are
Engine speed remains P.O.D. Cylinder seized in extended position. Check cylinder and replace as necessary.
Bypass.
original date of purchase.
The Belle Group warranty is against defects in design, materials an workmanship.
The following are not covered under the Belle Group warranty:
operation or user maintenance instructions.
claim, on any machine.
The following components are not covered by warranty.
· Engine spark plug
losses or expenses in connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
For warranty claims:
Belle Group Inc
USA.
Downloaded from www.Manualslib.com
Troubleshooting Guide
Cause
Air cleaner blocked.
Engine malfunctions.
Engine Ignition switch or connecting wires
Hydraulic pump seized.
Relief valve set low or worn.
Engine power low.
Oil cooler fan damaged.
Hydraulic pump worn or damaged.
Relief valve set low or worn.
Hydraulic oil contaminated.
P.O.D. Cable adjustment
manuals search engine
Remedy
Clean or renew element. Refer to engine manual.
Refer to engine manual.
Top up to correct level. Refer to engine manual for correct grade.
Check for earth leak, and renew worn or damaged parts.
Renew pump.
Check relief valve setting and adjust.
Refer to engine manual.
Tighten or renew as necessary.
Renew pump.
Check setting and renew as necessary.
Drain oil tank and transmission hoses and replenish with
Check the cylinder and replace as necessary
Re-adjust as necessary.
Warranty
21