Intermec AC18 Bedienungsanleitung Seite 4

4
Downloaded from www.Manualslib.com
2 Connect one end of the power cord to the AC adapter and the
other end to an AC power outlet.
3 Insert the battery pack into any bay on the charger. The
charging status light next to the battery turns on after two to
three seconds.
4 Charge the battery pack for at least 4 hours.
Understanding the Charging Status LEDs
LED Color Description
Off No battery installed in charger.
Solid red The battery is charging.
Blinking red The battery charger is experiencing a charging
error. Remove the battery for 10 minutes and
then reinsert it into the charger. If the charger
still shows an error, the battery may be
damaged. Replace the battery.
Solid green The battery is completely charged.
Caution: See Compliance Insert for use restrictions
associated with this product.
Input voltage: 12 VDC
manuals search engine
4-bay battery charger
Charging status
light