Alarm Clock; Setting Up The Alarm Clock Using The Remote Control; Setting Up The Alarm Clock On The Docking Speaker; Deactivating The Set Alarm Clock - Honeywell OVALE OVD270 Bedienungsanleitung

SPEAKER & SOUND PROFILES (CONTINUED)
Dynamic Bass Boost Sound Enhancement
The Dynamic Bass Boost (DBB) Button allows you to
enhance the bass sounds of the speaker. Press the DBB
Button on the Remote Control to switch on Dynamic Bass
Boost. The LED Display Screen will display "dbb1" when
DBB is activated. Press DBB on the Remote Control again
to switch off DBB. The LED Display Screen will display
"dbb0" when DBB has been switched off.

ALARM CLOCK

Setting Up the Alarm Clock Using the Remote Control

PM
Indicator
Light
To set the Alarm Clock make sure that the Docking
Speaker is in Standby Mode.
1. Press and hold the ALARM Button on the Remote Control
for about 2 seconds to enter the Alarm Setting Mode.
Press the ▲ and ▼ Button to select the alarm type:
2.
• TUN (to wake to your selected FM Radio Station)
• iPod (to wake to your iPod/ iPhone/ iPad music)
• Buzz (to wake to a buzzer sound)
Press the ALARM Button to confirm the alarm type.
Press the ▲ and ▼ Button to select the volume of the
3.
alarm. Press the ALARM Button to confirm the volume
setting.
Press the ▲ and ▼ Button to select the Hour time
4.
setting for the Alarm. Press the ALARM Button to confirm
the Hour setting.
5. Repeat Step 4 to set the Minute time setting.
6. Alarm is now set up.
7. Press the ALARM Button once to activate the set alarm.
The Alarm Indicator Light on the LED Display Screen will
turn ON to indicate the Alarm is activated.
Downloaded from www.Manualslib.com
DBB on
DBB off
manuals search engine
ALARM CLOCK (CONTINUED)

Setting Up the Alarm Clock on the Docking Speaker

1. Press the
until the LED Display Screen displays "ALA" (Alarm).
2. Press the
3. Press the
alarm type:
• TUN (to wake to your selected FM Radio Station)
• iPod (to wake to your iPod/ iPhone/ iPad music)
• Buzz (to wake to a buzzer sound)
Press the
4 Press the
Press the
5. Press the
Alarm. Press the
6. Repeat Step 5 to set the Minute time setting.
7. Alarm is now set up.
8. To activate this set Alarm from the Docking Speaker,
press the
anytime during Step 2 to Step 5. The Alarm Indicator
Light on the LED Display Screen will turn ON to indicate
the Alarm is activated. To activate the Alarm using the
Remote Control, simply press the ALARM Button on the
Remote Control once until you see the Alarm Indicator
Light switch ON.
Alarm

Deactivating the Set Alarm Clock

Indicator
Light
Press the ALARM Button on the Remote Control to
deactivate the alarm at any time. The Alarm Indicator
Light will switch off to indicate that the Alarm has been
deactivated and will NOT switch ON again until you press
the ALARM Button again. You can also deactivate the
Alarm by pressing the
Speaker during the Alarm Set Up.

Setting Up a Music Playlist Alarm

If you have chosen the iPod alarm type to wake up to
songs from a selected play list, you need to:
1. Create a new playlist titled "Ovale Alarm" on your music
device and copy the song tracks that you wish to set as
your alarm music to that playlist.
2. Before going to sleep (or before the alarm activates at the
set alarm time), make sure that the last played song from
your iPod/ iPhone/ iPad was from the "Ovale Alarm"
playlist.
IMPORTANT: If the iPod alarm type was selected for the
alarm, but no iPod/ iPhone/ iPad is docked onto the
Docking Speaker , the Buzzer alarm type will automatical-
ly activate by default at the set alarm time.
Button on the Docking Speaker repeatedly
Button to enter the Alarm Setting Mode.
Button on the Docking Speaker to select the
Button to confirm the alarm type.
Button to select the volume of the alarm.
Button to confirm the volume setting.
Button to select the Hour time setting for the
Button to confirm the Hour setting.
Button during the Alarm set up at
/
/ Button on the Docking
9