Denon Professional DN-300DH Benutzerhandbuch Seite 7

Operation
Remote Control
1. Mute Button: Press this button to silence the audio output.
Press this button again to turn the sound on. See
> Using the Radio
2. ST/MO: Press this button to alternate between Stereo mode
and Mono mode.
Stereo: FM stereo broadcasts are received in stereo and the
"ST." indicator lights on the display.
Mono: To compensate for weak FM stereo reception, select
this mode. Reception will now be monaural, reducing
unwanted noise.
3. PTY (Program Type) Search: Press this button to search for a
certain style of radio programming and save these as presets.
Note: This only applies to FM mode.
a. Press the PTY button. "PTY SEL" will flash on the display.
b. Press the Tuning Up/Down buttons to select the
program type. The chosen program type (e.g. "Talk") will flash on the display.
c. Press PTY to confirm the program selection. "PTY SRH" will appear on the screen
as the unit searches for radio stations in that style.
Note: RDS is a method for the transmission of additional information via VHF stations.
For example, the name of the station broadcasting, the name of the program, or the type
of program will be shown on the multifunction display. It can only function if the local
broadcasting stations have the RDS transmission and the signal is strong enough.
News station
News
Inform Talk or news
Sports station
Sports
Talk Information, interviews, consumer advice
Rock music
Rock
Cls Rock Classic rock music
Current/oldie adult hits, acoustic, solo vocalists
Adlt Hit
Light melodic rock music
Soft Rck
Top 40 Current popular music
Contemporary and traditional country music
Country
Oldies Popular non-current music
Light music
Soft
Nostalga Music and radio shows from decades past, usually 1940's and prior
Mostly instrumental jazz and blues music
Jazz
Classicl Classical music
Disaster report
Alert
7
for more information.
Operation
1
4
7
9
2
3
5
6
8
11
10