Specifications; Care And Cleaning - Renkforce RF-DKS-620 Bedienungsanleitung

• 3.5 mm jack socket (9): Use this socket to connect analogue audio devices such as a head-
set, microphone or speaker.
• USB-C™ connection plug (10): Use this USB-C™ connection to connect the host,
e.g. a laptop computer, smartphone or tablet.
In order to use the HDMI graphics outputs, the host device (mobile/laptop/tablet
PC) must support video output. The host device (mobile/laptop/tablet PC) must also
support OTG functionality.
The host device (mobile/laptop/tablet PC) must also support OTG functionality.
During use with the docking station, it is recommended to continuously supply the
host device with power via a charger in order to ensure the stable provision of all the
docking station's functions.
b) Network connection
• If there is a network or system administrator who is responsible for your network (e.g. in
a large company), ask them to set up the connection and configure the settings.
• The Ethernet port (5) on the docking station should be connected to your router or network
switch using a 1:1 fully wired network cable.
• The specified maximum data transmission rate of 1000 MBit/s (Gigabit LAN), or appro-
ximately 125 MByte/s, is never reached in practice. This is due to the transmission me-
thod used, transmission errors or other devices on the network and due to the maximum
transmission rate of the USB3.1 USB-C™ input port (the data for the graphics output are
transmitted via the same USB port, as is the case for the external sound card and the USB
hub in the docking station).
• If you are using Windows, it may take some time for the computers to appear on the net-
work.
• When you switch the computers on and Windows loads on all computers within a few se-
conds, you cannot usually access another PC immediately. After a few minutes, if it is still
not possible to access other computers, check the settings of any firewalls and/or virus
scanners. Access permissions must also be set accordingly, if you are using an operating
system that offers such features. Consult the applicable operating instructions when acces-
sing a network printer or other devices on the network. There are numerous reasons why a
network connection may fail. Please refer to the appropriate specialist literature or consult
a specialist technician.
• If you are not using a DHCP server (e.g. integrated in all DSL routers), you should assign a
fixed IP address to each computer.
• Assign an IP address to the first computer (e.g. 192.168.1.1), followed by the second com-
puter (192.168.1.2), and so on. The first three numbers must be the same for all com-
puters, and the last number can be between 1 and 254. The "subnet mask" must be set
to 255.255.255.0 for all computers and devices on the network. Bear in mind that an IP
address (e.g. 192.168.1.1) can only be used once on the network. If you have set your
router IP address to 192.168.1.1, no other device on the network can use this IP address.
c) Tips and useful information
• When transmitting video, the connected signal devices must support the output of video
signals.
d) Possible errors – troubleshooting
Why can't I see video?
1. Check all connections.
2. Use a standard HDMI or VGA cable.
Why can't I hear sound?
3. Verify that the monitor has a speaker.
4. Set the connected monitor as a standard audio device.

Care and cleaning

• This product does not require maintenance. Repair or maintenance work must be carried
out by a specialist.
• Disconnect the product from the power supply before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these
may damage the enclosure or cause the product to malfunction.
• Use a dry, lint-free cloth to clean the product. Dust can be easily removed using a clean,
soft brush and a vacuum cleaner.
Disposal
Electronic devices are recyclable waste and must not be placed in household waste.
At the end of its service life, dispose of the product in accordance with the applicable
regulatory guidelines.
You thus fulfil your statutory obligations and contribute to protection of the environment.

Specifications

Operating voltage/current ............. 5 V/DC, 3 A (via USB-C™ connection plug)
USB3.0 ports ................................ 4x USB-A
max. 5 GBit/s
5 V/DC, 0.9 A, 4.5 W
Number of USB3.0 ports .............. 4x, 5 V/DC, 0.9 A, 4.5 W
USB3.0 speed .............................. max. 5 GBit/s
Number of USB-C™ ports ............ 1 x
USB-C™ speed ............................ max. 5 GBit/s
USB-C™ ports .............................. 1 x
max. 5 GBit/s
Number of USB-C™ plugs ........... 1 x
Number of HDMI ports .................. 2 x
Display Port .................................. 1 x
...................................................... 1 x
Ethernet port ................................. 1 x RJ45
max. 1000 MBit/s (without driver)
Speed ........................................... max. 1000 MBit/s (without driver)
USB-C™ charging port (PD3.0) ... 87 W (output)
20 V/DC, 5 A, 100 W (input)
Resolutions ................................... DP 4K (60 Hz) for DP1.4 input signal
HDMI1 4K (60 Hz) for DP1.4 input signal
HDMI2 4K (30 Hz)
Audio/microphone connection ...... 1x 3.5 mm jack socket
SD/microSD card slot ................... 2.0 - Read: 50–104 MBit/s; Write: 30–40 MBit/s (depending
on the quality of the memory card)
SD/microSD capacity .................... Max. 2 TB (memory card not included)
Cable length ................................. 20 cm
Supported operating systems ....... Windows
10 (32/64-bit), 10S, RT, Mac OS 10.10.2 to Mac OS
10.15.5, Linux 2.6 to 18.04, Android™ 6.0 to 10.0, Win-
dows Phone 10, iPad OS 13.1 to iPad OS 13.1+
Operating conditions ..................... 0 to +45 °C, 10–85 % relative humidity (non-condensing)
Storage conditions ........................ -10 to +70 °C, 5–90 % relative humidity (non-condensing)
Dimensions (W x H x D) ............... 279 x 16.5 x 54.3 mm
Weight .......................................... 233 g ±5g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming or capture in electronic
data processing systems, requires the prior written approval of the publisher. Reprinting, also in part, is prohibited. This
publication reflects the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
7 (32/64-bit), 8.0 (32/64-bit), 8.1 (32/64-bit),
®
*2266944_v1_0820_02_DS_m_4L_1