Troubleshooting; Technical Specifications - vidaXL Gasgrill Bedienungsanleitung

• If the inside surface of the barbecue lid has the appearance
of peeling paint, baked on grease build-up has turned to
carbon and is flaking off, clean thoroughly with strong, hot
soapy water solution. Rinse with water and allow to dry
completely. NEVER USE OVEN CLEANER.
2. Interior Of Barbecue Bottom
Remove residue using brush, scraper and/or cleaning pad. Then
wash with a soapy water solution. Rinse with water and allow
to dry.
3. Cooking Grid
Use a mild soapy water solution. Non-abrasive scouring powder
can be used on stubborn stains then rinse with water.
6.2

Troubleshooting

Problem
Burners will not light
using the ignition
system.
Burner will not light with
a match.
Low flame or flashback
(fire in burner tube, a
hissing or roaring noise
may be heard).
Difficulty turning gas
valve knob.
6.3 Servicing
• Your gas barbecue should be serviced annually by a competent, authorised person.

7 Technical specifications

Item No.
Total Heat Input (All Gas Categories)
Gas Category
Types Of Gas
Gas Pressure
Injector Size
Possible cause
LP gas cylinder is empty.
Faulty regulator.
Obstructions in the burner.
Obstructions in gas jets or gas hose.
Electrode wire is loose or disconnected from electrode or
ignition unit.
Electrode or wire is damaged.
Faulty push-button igniter.
LP gas cylinder is empty.
Faulty regulator.
Obstructions in the burner.
Obstructions in gas jets or gas hose.
LP gas cylinder too small.
Obstructions in the burner.
Obstructions in gas jets or gas hose.
Windy conditions.
Gas valve jammed.
44281-44286
12.0 KW (872 g/h)
I3+(28-30/37)
G30 Butane
28-30 mbar
0.70mm
4. Cleaning the burner assembly
• Turn the gas OFF at the control knob and disconnect the
cylinder.
• Remove cooling grate.
• Clean the burner with a soft brush or blow clean with
compressed air and wipe with a cloth.
• Clean any clogged parts with a pipe cleaner or stiff wire
such as an opened paper clip.
• Inspect burner for any damage, cracks or holes. In case of
damage, replace with a new burner. Re-install the burner,
check to ensure that the gas valve orifices are correctly
positioned and secured inside the burner inlet (venturi).
I3B/P(30)
G31 Propane G30 Butane,
G31 Propane
37 mbar 30 mbar
0.70mm
Solution
Replace with a full cylinder.
Have regulator checked or replace.
Clean burner.
Clean jets and gas hose.
Reconnect wire.
Change electrode and wire.
Change igniter.
Replace with a full cylinder.
Have regulator checked or replace.
Clean burner.
Clean jets and gas hose.
Use larger cylinder.
Clean burner.
Clean jets and gas hose.
Use BBQ in a more sheltered
position.
Replace gas valve.
I3B/P(37) I3B/P(50)
G30 Butane, G30 Butane, G31
G31 Propa Propa
37 mbar 50 mbar
0.65mm 0.60mm
| 15