Product Description; Operation - GYS NOMAD POWER 300 Betriebsanleitung

Translation of the original instructions

PRODUCT DESCRIPTION

Thanks to its high-performance lithium-ion battery (300: 37Wh, 400:45Wh), the NOMAD POWER 300/400 performs
3 functions:
• Instant start of vehicles equipped with a 12V battery (6 cells of 2V), such as karts, motorcycles, cars, etc.
• 12 V power supply for small electronic devices via their USB ports. Most of mobile phones, smartphones, portable
gaming devices, MP3/MP4 players can be charged with the included accessories.
• Service lighting
NOMAD POWER 300
NOMAD POWER 400
Extreme outside temperatures or mechanical problems on the vehicle (poor starter, no fuel or engine pro-
blems) can limit the booster's capacity.

OPERATION

1. Press the ON / OFF button (6). The display shows the remaining power and the activated output ports.
2. The display shows a percentage charge from 0% to 100% when the NOMAD POWER is fully charged.
!
RECHARGE THE NOMAD POWER before first use and after each use.
INTERNAL BATTERY CHARGING
non fourni
OR
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles equipped with a 12V battery.
To start a vehicle, please process as follows:
The NOMAD POWER must be at least 80% charged to make a start. A full charge of the booster is recom-
!
mended.
1
2
10
NOMAD POWER 300 / 400
Start function
       
1 - Plug the USB cable to a charger with a USB output (not supplied)
2 - Plug the USB-C
start the charge.
1 - Plug car adaptor to the car cigarette lighter socket.
2 - Plug the other end of the adapter to the input port (4) of the NOMAD POWER to start
the charge.
1- Connect the red clamp to the (+) of the battery.
2- Connect the black clamp to the (-) of the battery.
Connect the jumper cable to the NOMAD POWER connector (1).
end of the cable to the input port (4) of the NOMAD POWER
EN