Installation - Deltec 400i Bedienungsanleitung

Deltec Skimmer 400 i
The Deltec Skimmer 400i designed to operate only in external filter sumps.

Installation

For best performance the water level in the filter sump (picture 1) should be between 150
and 250 mm. A prerequisite for continuous efficient performance is a constant water level in
which the skimmer operates. Ideally, a water level top up system should be used such as
the Deltec Aquastat 1001 or better still a separate skimmer compartment in the sump
(picture 2) with a hight between 150 and 250mm. The water level in the skimmer
compartment should be higher than in the rest of the sump, but within the levels
recommended for the skimmer model.
This compartment can be supplied with water from a bypass of the aquarium overflow.
- 10 -