Intended Use; Risk Of Electric Shock; Transport And Storage - BEHA Mandrel Welder EErgo Bedienungsanleitung

1.5 Intended use

The unit may be used only under the conditions and for the purposes for
which it was designed. Therefore, especially observe the safety instruc-
tions and technological specifications such as environmental conditions
and use in a dry environment.
Only qualified personnel instructed in the use may operate the product.
Please ensure that the product is only used in a safe environment.
The product meets the current regulations and standards with respect to
the electromagnetic compatibility. Very rarely it may occur that the product
has a negative impact on other electrical or electronic devices or the func-
tioning gets disrupted through other electrical or electronic devices.
Clean product with dry cloth only. Do not use water or cleaning agents.

1.6 Risk of electric shock

When product is opened, modified or damaged the operational safety is no
longer guaranteed. Only authorized service technicians may open the unit.
Repair of the product must be done by BEHA repair service.

1.7 Transport and storage

Please keep original packaging for reshipment, e.g. in case of repair. Damage in
transit is not covered by warranty.
The product has to be stored in an enclosed and dry space. Handle the unit
with care during transport to avoid damage.
Store the product outside of the reach of unauthorized persons, e.g. chil-
dren.
If the product is moved at extreme temperature differences (≥ 20°C), an
acclimatization time of at least 2 hours is necessary before connecting it to
the mains.
11