Time Setup; Setup Unit Mmhg/Kpa; Who Blood Pressure Classification Display - Wellion WAVE professional Handbuch

TIME SETUP

1. Press and hold the "SET" button until the year number displays and flashes on the LCD to enter setting
mode.
EN
2. Press the "MEM" button to adjust the year, then press the "SET" button again to save your setting and enter
the month setting mode.
3. Following the same steps to adjust day/hour/minute until the setting is completed.

SETUP UNIT mmHg/kPa

The results can be displayed as one of two different units: mm Hg (mmHg) or kPa (kPa).
The devices preset is mmHg. To change the measuring unit press and hold the "ON/
OFF" button for five seconds, then press the "MEM" button. Please note that all mem-
orized results change their unit as well.

WHO BLOOD PRESSURE CLASSIFICATION DISPLAY

Diastolic blood pressure Reference material:
journal of hypertension 1999. vol 17 No.2
24
Year Month Day Hour Minute
Grade 3 hypertension (severe)
Grade 2 hypertension (moderate)
Grade 1 hypertension (mild)
High-normal
Normal
Optimal