Operating Machine - Castolin MIG 170 MULTI Betriebsanleitung

MIG 170 multi
Input Connections
Make sure the voltage, phase and frequency of input power is as specified on
machine rating plate located at rear of machine.
Have a qualified electrician provide suitable input power.
Turn the input power OFF at the mains switch before working on this equipment.
Have a qualified electrician install & service this mig welding equipment.
Allow machine to sit for 5 minutes minimum to allow the power capacitors to
discharge before working inside this equipment. Do not touch electrically live
parts.
The multi process MIG170C Welders require a 230V 50/60Hz 1-Phase supply.
Fit required plug as per your electrical installation

5. OPERATING MACHINE

SAFETY PRECAUTIONS
WARNING!
ELECTRIC SHOCK CAN KILL
Do not touch electrically live parts or electrode with skin or wet clothing.
Insulate yourself from work and ground
Always wear dry insulating gloves
WARNING!
FUMES AND GASES can be dangerous
19