Dmx Control; Ilda Mode; Maintenance / Cleaning - Laserworld CS-250 RGY Bedienungsanleitung

Manual / Bedienungsanleitung: CS-250 RGY
"DMX": DMX512 Mode. Use the first 9 switches to select the address:
x x x
1 2 4
e.g. 1000 0000 01, DMX mode address 1 (1+0+0+0+0+0+0+0+0+0)
0010 0100 01, DMX mode address 36 (0+0+4+0+0+32+0+0+0)

DMX control

Channel
1 Mode
2 Colour
3 Pattern
4 Vertical movement
5 Horizotal movement
6 Vertical rotation
7 Horizontal rotation
8 Rotation
9 Zoom
10 Size
11 Pointdraw
12 Drawing

ILDA mode

When an ILDA compatible interface is connected to the laser, the laser is automatically switched to
ILDA mode. Output is then controlled from a PC running software. The scanners are set for ca.
10000 PPS at 20-25° optical, when running faster reduce image size/scan angle.

Maintenance / cleaning

Always disconnect from the mains when the device is not in use or before cleaning it.
To remove top, remove 2 screens on the top of one side plate (one front, one back), bend out side,
and slide top out. Remove any deposits of dust, especially at the fan. Check for condensed fog fluid
inside, if so, clean and rearrange the position of laser and or hazer.
"halo" is noticeable around the beam, or an unusual high amount of diffuse light can be seen inside
the device.Clean the mirrors with window cleaner and a paper towel.
Never look directly into the light source. Always disconnect from the mains when the
device is not in use or before cleaning it.
x x x
8 16 32
Value
0..49
50..99
100..149
150..255
0..5
6..15, .., 26..35
36..105
106..175
176..245
246..255
0..255
0..127
128..191
192..255
0..127
128..191
192..255
0..127
128..255
0..127
128..255
0..127
128..191
192..255
0..85
86..170
171.255
0..255
0..255
0..127
128..255
x x x
64 128 256
Function
Music active
Automatic mode/beam effects
Automatic mode/graphics
DMX
Laser off
Red/green/yellow
Colour change (incr. Speed)
Colour change (orig. pattern colours)
Pattern coloured randomly
Original pattern colours
128 patterns
Static
Automatic down (inc. speed)
Automatic up (inc. speed)
Static
Automatic to left (inc. speed)
Automatic to right (inc. speed)
Static
Dynamic (incr. Speed)
Static
Dynamic (incr. Speed)
Static
Dynamic clockwise
Dynamic counterclockwise
Zoom out (incr. speed)
Zoom in (incr. speed)
Zoom in/out (incr. speed)
Size
Only points are drawn
Piecewise drawing (incr. speed)
Piecewise drawing/erasing (incr. speed)
Page / Seite 5 of / von 12
Mirrors need cleaning, when a
Version / Stand: 11/2009