Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Diamond core drilling machine, manual, transport case
Application for Indented Purpose
The diamond core drill DB 1300 T is indented only for professional use and
may be used only by instructed personnel.
With a dust extraction and an appropriate drill bit, the tool can be used for
cutting of bricks, sand-lime bricks and pore concrete (not for concrete,
stone).
§
§
§
§
Downloaded from
www.Manualslib.com
Supply
Safety Instructions
Safe use of the tool is only possible if the user had
studied the instruction manual and safety instructions
completely and is strictly following the instructions
contained therein.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
Prior to drilling in walls and ceilings, check them for hidden
cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
Prior to the start of your work, consult a statics specialist to
determine the exact drilling position.
If drilling through ceilings, secure the place below, because
the may fall downward.
The tool must neither be wet nor used in humid environment.
Do not use the tool in an environment with danger of explosion.
Do not use the tool standing on a ladder.
Do not drill into asbestos-containing materials.
Do not carry the tool at its cable, and always check the tool, cable
and plug before use. Have damages only repaired by specialists.
Insert the plug into the socket only when the tool switch is off.
manuals search engine
15
Werbung
