Safety Instructions - Mitsubishi Electric ecodan PAC-WF010-E Installationshandbuch

Contents

1. Safety Instructions ..........................................................................................

2. Product Introduction .......................................................................................4
3. Parts ...............................................................................................................4
4. Connecting the Wi-Fi interface .......................................................................4
5. LED pattern ....................................................................................................5
6. Switch Function ..............................................................................................5
7. Specifications .................................................................................................5
About Wi-Fi interface
This device, Wi-Fi interface, communicates the status information and controls the commands from
the server by connecting to an ecodan unit.
● Some ecodan units are not compatible with the Wi-Fi interface. Make sure that the ecodan unit is
compatible with the Wi-Fi interface before attempting to install the Wi-Fi interface.
The software of ecodan unit needs to be upgraded before using Wi-Fi interface.
Refer to the website of MELCloud for information about the models that need to be
upgraded, the way to obtain and upgrade the software.
1. Safety Instructions
● Read all Safety Instructions before using
the Wi-Fi interface.
● This installation manual contains important
safety information. Be sure to comply with
the instructions.
(Improper handling may have serious consequences, including serious injury or death.)
■ Users should not install the Interface on their
own.
Improper installation may result in fire, electric
shock, or damage/water leaks. Consult the
dealer from whom you purchased the unit or
professional installer.
■ The Interface should be securely installed in
accordance with this installation manual.
Improper installation may result in fire, electric
shock, or damage.
■ The unit should be mounted in a location that
can support its weight.
If the unit is installed in a location that cannot
support its weight, the Wi-Fi interface could fall
and cause damage.
■ Connect and fasten the electric wires
securely so external force on the wires will
not apply on the terminals.
Improper connection and mounting may result in
breakdown, heat generation, smoke generation,
or fire.
■ Mitsubishi components or other designated
components must be used for installation.
Improper component may result in fire, electric
shock, or damage/water leaks.

Downloaded from www.Manualslib.com manuals search engine
● After installing the Wi-Fi interface, provide this
installation manual for the user. Instruct users to
store it with their ecodan unit instruction manual
in a safe location.
Warning
■ Electric work must be performed by authorized
personnel according to the local regulations
and the instructions detailed in the installation
manual.
Inadequate circuit capacity or improper installation
may result in electric shock or fire.
■ This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
■ Children should be supervised to ensure that
they do not play with the appliances.
■ This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
■ This Class B digital apparatus complies with
Canadian ICES-003.
■ Do not connect the Wi-Fi interface to earth
inside the ecodan unit.