SPEEDLINK POWERSTIXX 2.1 Bedienungsanleitung Seite 11

Master (-/+):
Sub
Power On/Off
(back of Subwoofer)
3. How to fit or change batteries:
1. Using a screwdriver, remove the screw on the back of the remote
control (point 1 of diagram).
2. Before you remove the battery compartment, lay the remote control
on a suitable surface with function buttons pointing upwards (point 2
of diagram). Pull out the battery compartment at the bottom end of
the remote control (point 3 of diagram).
Downloaded from www.Manualslib.com
Controls the overall
volume of the system
Controls the bass
sound of the
subwoofer
Power switch to
completely switch off
the system
manuals search engine
Depending on the
selected sound source
(Input 1 or 2), the
LED flashes blue or
red when the volume
is altered.
Depending on the
selected sound source
(Input 1 or 2), the
LED flashes blue or
red when the bass is
altered.
After switching the
system off and then
on again, Input 1
is automatically
activated. The LED
flashes blue several
times and goes out.
11
D
GB
F
E
I
Fig. 3