Positioning And Starting Up The Laminator - HP OneLam 400 A4 Bedienungsanleitung

EN

Positioning and Starting Up the Laminator

The following section should help when starting up the laminator.
1 Set the laminator down on a level, stable working surface close to an easily accessible power
socket.
2 Switch the power switch to OFF.
Only use the power cable supplied.
3 Connect the power cable to the connection socket in the laminator.
4 Connect the power plug to a power socket.
5 Switch the power switch to ON.
Î The transport rollers start to rotate.
Î The "COLD" status LED lights up GREEN
6 Fold out the pouch tray (lid).
Î The laminator has been put into operation.
- 18 -