TC-Helicon GO XLR MINI Kurzanleitung Seite 6

6
GO XLR MINI
Controls
(1) (2) (3)
(5) (6) (7) (8) (9)
(10)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(4)
(8)
(9)
(10)
(11)
(11)
*Yeti is a registered trademark of Blue Microphones.
†PlayStation is a registered trademark or trademark of Sony Interactive Entertainment Inc.
SONY is a registered trademark of Sony Corporation.
‡Xbox is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
CHANNEL FADERS - Control individual channel levels in
your mix.
CHANNEL MUTE - Switches off the matching channel in
the mixer.
!@#$* - Button lets you instantly censor and "bleep out"
your mic.
"COUGH" - Mutes your microphone while the button
is held.
XLR MIC INPUT - For audio input from professional
microphones. For condenser-style microphones that
require "phantom power", go to the MIC tab in the GO XLR
app and activate the "Condenser" setting under MIC TYPE.
LINE IN - For audio input from devices such as phones,
tablets, computers, etc. The LINE IN connection can also be
used in a "2 PC" streaming setup to send chat alerts back
into GO XLR MINI.
LINE OUT - Contains an exact copy of your broadcast
stream audio. This connection can be used to connect
to a dedicated streaming computer or other devices
like speakers.
USB - Input for PC connection, firmware updates and
remote control with GO XLR app.
NOTE: GO XLR MINI is designed for use with USB 2.0
ports. USB 3.0/3.1 ports can cause audio dropouts and
disconnections.
OPTICAL - Input for connection to SONY PlayStation
Microsoft Xbox consoles.
‡
MIC - Input for connection to headset microphones.
Typically, this headset connection will be a pink connector.
NOTE: If you intend to use the popular Blue Yeti*
microphone, which has its own built-in headphone
output, you should run that built-in headphone output
into the GO XLR MINI's MIC input. For Blue Yeti mics
powered via USB, plug the USB connector directly into
your computer for power, but do not select the Blue Yeti as
an audio source on the computer. Instead, the Blue Yeti's
headphone output will be the audio source for mixing
inside GO XLR MINI.
PHONES - Output jack for your headphones. Typically,
the headphone connector will be a green connector.
or
†