Technical Specifications - Riwall PRO RAB 240 Übersetzung Der Originalanleitung

Overview
Different batteries are described in these
instructions.
The illustrated battery may differ in detail
from the one which you purchased.
1 Battery
2 Contacts
3 Release button
4 LED for battery state of charge
indicator
5 Button for battery state of charge
indicator

Technical specifications

Battery type
Nominal voltage V
Capacity Ah
Operating °C
temperature
Weight kg
6
Battery state of charge
 Press the button to check the state of
charge at the state of charge indicator
LED.
The indicator goes out after 5 seconds.
If the LED flashes, the battery must be
recharged. If the LED not lights up after the
button is pressed, the battery is faulty and
must be replaced.
Information to ensure a long
battery service life
Never charge batteries at temperatures
–
below 0 °C or above 40 °C.
Do not charge batteries in an
–
environment which has high air humidity
or at a high ambient temperature.
Do not cover batteries and/or the battery
–
Li-ion battery
charger during the charging process.
Battery and charger heat up during the
charging process. This is perfectly normal!
Lithium ion batteries do not exhibit the well
known "memory effect". Nevertheless,
40
before a battery is recharged, it should be
2 4 6
fully discharged and the charging process
always run to the end.
0...40
0.9 1.3 1.7
RAB240 / RAB440 / RAB640
CAUTION!