Raikko Bass Disc Kurzanleitung Seite 17

CoNNECtIoN VIa blUEtooth
after being switched on, the device will be in
"pairing mode". activate the Bluetooth
your audio device
a blue LED will flash on the speaker to signal that
it is ready.
if there is a Bluetooth
that has already been paired with the speaker, this
will be connected first.
Disconnect this device, if required, and connect
another Bluetooth
information, please refer to the user manual for your
device (m).
The wireless signal has a maximum range of 10 m.
Large obstacles, such as furniture, walls and
electronic devices, can limit the range.
attENtIoN!
it is not possible to pair multiple devices at
the same time. only one audio device can
access the speaker at any given time.
Downloaded from www.Manualslib.com
®
interface on
®
(m) and pair the speaker with it.
-enabled device within range
®
® -enabled device. For further
manuals search engine
CoNNECtIoN VIa CablE
To play audio in cable mode, connect the line iN-
(l) to the micro-USB connection port (f).
cable
Connect the other end of the cable to the
headphone output on your audio device
audio output on a computer/laptop (N). Then press
the mode key (b) to switch to line iN-mode.
attENtIoN!
Playback via Bluetooth
®
automatically when a cable is inserted. if
the cable is removed, playback through
Bluetooth may be restarted (if an audio
®
device is paired).
(m) or to the
connection stops