TaoTronics TT-BH053 Bedienungsanleitung Seite 7

7
Power On (Fig. 8)
Take out the earbuds from the charging case, they will power on
automatically.
8
L
L
Power Off (Fig. 9)
Place the earbuds into the charging case, they will turn off automatically.
9
L R
L R
05
R
R
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Take the earbuds out of the charging case. They will connect with each
other automatically. The LED indicators on both earbuds will flash blue
once. Then the LED indicator on both earbuds will flash blue and white
alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 53"in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note: It is not recommended to wear the two earbuds on different people. If
needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple
earbuds mode.
Single Earbud Mode
1. Take out one earbud from the charging case, it will enter pairing mode with
the LED indicator flashing blue and white alternately.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 53"in the searching results, tap
on the name to connect.
3. Once connected, the LED indicator will flash blue slowly.
06