Kicker KS Serie Bedienungsanleitung Seite 2

Wiring
Cableado
Verkabelung
Câblage
-
+
-
+
- -
Connect wiring to terminals.
Conecte el cableado a las terminales.
Schließen Sie die Kabel an die Klemmen an.
Connectez le câblage aux bornes.
source unit / amplifi er
unidad fuente / amplifi cador
Quelle / Verstärker
amplifi cateur / source
-
+
Two KS Speakers wired in series to a single channel
Total Impedance: 8 ohms
Dos KS Coax altavoces conectaron en la serie a un solo canal
Total Impedancia: 8 ohms
Zwei KS Koax-Systems an einen einzelenen Kanal anschließen
Total Impedanz: 8 ohms
Deux haut-parleurs à une chaîne seule
Total Impédance: 8 ohms
Two KS Speakers wired in parallel to a single channel
Total Impedance: 2 ohms
-
Dos KS Coax altavoces conectaron en la paralelo a un solo canal
Total Impedancia: 2 ohms
Zwei KS Koax-Systems an einen einzelenen Kanal Paralleler
Total Impedanz: 2 ohms
Deux haut-parleurs à une parallèle seule
Total Impédance: 2 ohms
Mounting
Montaje
Einbau
Montage
KICKER products are warranted against defects. Duration and terms of warranty depend on the laws in the country in which it was purchased. For details see your local KICKER Dealer or
www.kicker.com/warranty.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Secure speaker to desired location.
Asegure la bocina en la ubicación deseada.
Befestigen Sie den Lautsprecher am gewünschten Ort.
Fixez le haut-parleur à l'endroit désiré.
door
estructura de la puerta
Türkörper
corps de porte
door panel
panel de la puerta
Türverkleidung
panneau de porte
speaker cut-out
orifi cio del altavoz
Lautsprecherausschnitt
découpe de haut-parleur
KS Speaker
KS-Tieftöner
©2013 Stillwater Designs 41KSC+B-20131113