Technical Data; Noise/Vibration Information - Bosch GBH 18V-34 CF Professional Originalbetriebsanleitung

18 | English
(15) Button for depth stop adjustment
(16) Auxiliary handle (insulated gripping surface)
(17) Depth stop
A)
(18) Battery release button
(19) User interface
(20) Drill chuck mounting
(21) Front sleeve of the keyless quick-change chuck
(22) Retaining ring of the keyless quick-change chuck
(23) Battery charge indicator (user interface)
(24) Rapid shut-off indicator (Kickback Control) (user
interface)
(25) Working modes indicator (user interface)
(26) Button to select the working mode (user interface)
(27) Power tool status indicator (user interface)
(28) Smartphone indicator (user interface)
(29) Temperature indicator (user interface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Cordless rotary hammer
Article number
Rated voltage
Rated power input
A)
Impact rate
Impact energy per stroke ac-
cording to EPTA-Procedure
05:2016
Rated speed
– Clockwise
– Anticlockwise
Tool holder
Spindle collar diameter
Max. drilling diameter:
– Concrete
– Masonry (with hollow core
bit)
– Steel
– Wood
Weight according to EPTA-
A)
Procedure 01:2014
Length
Height
Recommended ambient tem-
perature during charging
1 609 92A 5JS | (30.01.2020)
Cordless rotary hammer
Permitted ambient temperat-
ure during operation
during storage
Compatible rechargeable
batteries
Recommended rechargeable
batteries for maximum per-
formance
Recommended battery char-
gers
Data transmission
Bluetooth
Signal interval
Max. signal range
A) Depends on battery in use
B) Limited performance at temperatures <0 °C
C) The mobile terminal devices must be compatible with Bluetooth
D) The signal range may vary greatly depending on external condi-
GBH 18V-34 CF
3 611 J14 0..
V= 18

Noise/Vibration Information

W 750
Noise emission values determined according
-1
min 0–2900
to EN 60745-2-6.
J 5.8
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 89 dB(A); sound power
level 100 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
-1
min 0–500
Vibration total values a
-1 determined according to EN 60745-2-6:
min 0–500
Hammer drilling into concrete: a
SDS plus
Chiselling: a
mm 74
Drilling into metal: a
The vibration level given in these instructions has been
mm 32
measured in accordance with a standardised measuring pro-
mm 40–82
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
mm 13
The stated vibration level applies to the main applications of
mm 40
the power tool. However, if the power tool is used for differ-
kg 5.2−6.3
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
mm 430
antly increase the exposure to vibration over the total work-
ing period.
mm 250
To estimate the exposure to vibration accurately, the times
°C 0 to +35
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
B)
and
®
D)
Low Energy devices (version 4.2) and support the Generic Ac-
cess Profile (GAP).
tions, including the receiving device used. The Bluetooth® range
may be significantly weaker inside closed rooms and through
metallic barriers (e.g. walls, shelving units, cases, etc.).
(triax vector sum) and uncertainty K
h
= 11 m/s
h
2 2
= 11 m/s , K = 2.8 m/s
h
2
= 2.5 m/s , K = 1.5 m/s
h
GBH 18V-34 CF
°C –20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V...
≥ 5.5 Ah
GAL 18...
GAX 18V...
GAL 36...
®
Bluetooth 4.2
C)
(Low Energy)
s 8
m 30
®
2 2
, K = 1.5 m/s ,
,
2
,
Bosch Power Tools