Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATION
REPEAT/RANDOM MODEL
Press the MODE Button before or during play .A single track, all Tracks or random can play. Each press
changes the mode as follows:
1 REPEAT
2 REPEAT ALL
3 RANDOM
4 REPEAT/RANDOM OFF
(Repeat indicator will flash) (Repeat indicator will be steady on) (Random indicator will be steady on) (Repeat indicator will turn off)
PROGRAMMED DISC PLAY
UP to 20 tracks can be programmde to play in a specific order by following these steps:
1. Set the CD/AM/FM/LINE IN switch into CD
2. Press the ON/OFF button into ON status, the ON/OFF indicator will light up
3. Press the PROGRAM button
4. Press the
or
button to select the track number
5. Press the PROGRAMM button when the desire track number is displayed
6. Repaet step 5 and 6 to program more tracks
7. Press the PLAY/PAUSE button to start programmed playbeck
To check the programm
Press the PROGRAMM button during stop mode. The programmed track number will be displayed in programmed order each time you press the
PROGRAMM button
To erase the programm
-Press the PROGRAMM button and then the Stop button when the CD is stopped.
-Press the STOP button when then the CD is playing the programmed track.
-Opening the disc compartment will also erase the contents of programm memory.
TO SET THE ALARM TO WAKE TO BUZZER/CD/RADIO
The radio, buzzer or CD automatically sounds at the designated time every day. You can set in total two wake up times (ALARM1,ALARM2) into this
unit. Wake by CD/FM/AM/BUZZER (Please do under OFF mode, while the ON/OFF indicator is off)
1. Press the ALARM1 or ALARM2 button, the display will flash
2. Use the MINUTE or HOUR button to set the desire wake up time.
3. Press the ALARM1or ALARM2 button after setting. The Alarm1 / Alarm 2 active indicator will up on the display respectively.
4. Slide the BUZZER/CD/RADIO/LINE IN selector into BUZZER position for BUZZER wake up. For CD/AM/FM wake up, firstly slide the BUZZER/CD/
RADIO/LINE IN selector into CD/RADIO/LINE IN position, then slide and function selector into CD,AM or FM position and adjust the volume.
5. To cancel ALARM1 wake up, press the ALARM1 button once, the active indicator will off (Same for ALARM 2cancellation)
LINE-IN FUNCTION
You can listen to the sound from external audio sources ´
1. Slide the buzzer /cd/radio/line in switch to line position
2. Connect the external audio source through 3,5mm Line in Jacks, located at the rear of the unit
Note Connection cables are not included
SNOOZE
The alarm can be temporarily turned offby pressing the SNOOZE button; the ALARM1 or ALARM2 indicator
will flash at this time; the alarm will turn back on automazically 6minutes later.
13
Downloaded from
www.Manualslib.com
manuals search engine
Werbung
Inhaltsverzeichnis
