Screen - Mitsubishi Electronic MDT421S Bedienerhandbuch

Main-Menu

SCREEN

H POSITION
Controls Horizontal Image position within the display area of the LCD.
Press + button to move screen to right.
Press - button to move screen to left.
V POSITION
Controls Vertical Image position within the display area of the LCD.
Press + button to move screen to UP.
Press - button to move screen to DOWN.
CLOCK
Press + button to expand the width of the image on the screen the right.
Press - button to narrow the width of the image on the screen the left.
CLOCK PHASE
Improves focus, clarity and image stability by increasing or decreasing this setting.
ZOOM MODE
You can select "FULL", "NORMAL" and "CUSTOM" and "REAL". (INPUT RGB1, 2, 3, 4, 5, 6 only) You can also select "FULL",
"NORMAL" "DYNAMIC" and "CUSTOM" and "REAL". (INPUT DVD/HD, VIDEO<S>, VIDEO only)
Selecting "DYNAMIC" will make the screen display panoramic with the expansion of the middle and outside of the screen
changed. (The upper and the bottom of the image will be cut by expansion.)
Dynamic image is the same as FULL size image when HDTV signal is input.
Selecting "REAL" image will be displayed 1 by 1 pixel.
CUSTOM ZOOM
"CUSTOM ZOOM" will be selected when you select "CUSTOM" on the screen "ZOOM" mode.
ZOOM: expands the horizontal and the vertical size simultaneously.
HZOOM: expands the horizontal size only.
VZOOM: expands the vertical size only.
H POSITION: moves to the right with + button. moves to the left with – button.
V POSITION: moves up with + button. moves down with – button.
H RESOLUTION
Adjusts the horizontal size by increasing or decreasing the setting.
Press + button to expand the width of the image on the screen.
Press - button to narrow the width of the image on the screen.
V RESOLUTION
Adjusts the vertical size by increasing or decreasing the setting.
Press + button to expand the height of the image on the screen.
Press - button to narrow the height of the image on the screen.
ROTATION
The OSD screen is rotated.
SCREEN RESET
Selecting Screen reset allows you to reset all OSD settings from PICTURE setting.
Select "Yes" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and then return to the previous menu.
Downloaded from www.Manualslib.com
* : INPUT RGB3, 4, 5 only
* : INPUT RGB3, 4, 5 only
* : INPUT RGB1, 2, 3, 4, 5, 6 only
* : INPUT RGB1, 2, 3, 4, 5, 6 only
manuals search engine
OFF H FLIP
Horizontally rotated
English-26
V FLIP
Vertically rotated