Power Indicator; Using Power Management; Selecting A Video Source; Picture Size - Mitsubishi Electronic MDT421S Bedienerhandbuch

Power Indicator

Power ON
Power OFF
Power Standby when
"SCHEDULE" is enable
Power Standby
Diagnosis
(Detecting failure)

Using Power Management

The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fi xed period.
The power management feature on your new display has
been set to the "ON" mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.

Selecting a video source

To view a video source:
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.

Picture Size

RGB 1, 2, 3, 4, 5, 6
DVD/HD, VIDEO<S>,
VIDEO
Signal Type
4:3
Squeeze
Downloaded from www.Manualslib.com
Status
Green
Red
Red On
Green Blinking
Red, Green
Red Blinking
* See troubleshooting on
page 38.
FULL NORMAL
REAL
FULL NORMAL
REAL CUSTOM
NORMAL SIZE Recommended Size
NORMAL
DYNAMIC
FULL
manuals search engine
NORMAL: Display the input signal aspect ratio from the PC
signal, or display in 4:3 aspect ratio from the DVD/HD or
VIDEO signal.
FULL: Display in entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with
non-linearity. (Some round image will be cut by expansion.)
CUSTOM (ZOOM): Image can be expanded beyond the
active display area. The image which is outside of active dis-
play area is not displayed.
REAL: Image will be displayed 1 by 1 pixel.
ZOOM

Picture Mode

RGB 1, 2, 3, 4, 5, 6
DVD/HD, VIDEO<S>,
VIDEO

Audio Source Switching

You can switch the audio source using the AUDIO INPUT
button.
RGB 1, 2, 6 HDMI
Other than
RGB 1, 2, 6

Control Lock Mode

This function disables the operation buttons so that the ad-
justments you make are not changed when they are pressed.
To disable the buttons, press and hold down the
CUSTOM
buttons together for at least 3 seconds.
To enable the buttons, press and hold down the
DYNAMIC
buttons together for at least 3 seconds again.
English-21
ZOOM
HIGHBRIGHT STANDARD
HIGHBRIGHT STANDARD
AUDIO1 AUDIO2
AUDIO2 AUDIO3
AUDIO1
sRGB
CINEMA
AUDIO3
and
and