Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
HDMI signal splitter
Please read these operating instructions carefully
prior to operation and keep them for later reference.
1 Operating Elements
1 LEDs "Output": the respective LED lights up when
a reproducer is connected to the corresponding
output (5) and switched on
2 POWER switch with power indication
3 Connection DC/5 V for the supplied power supply
unit
4 Signal input jack "Input" for connection of a player
with HDMI
5 Signal output jacks "Output" for connection of up to
four reproducers with HDMI
2 Safety Notes
The units (HDMI signal splitter and power supply
unit) correspond to all required directives of the EU
and are therefore marked with
WARNING The power supply unit is supplied with
hazardous mains voltage. Leave serv-
icing to skilled personnel only. Inexpert
handling or modification of the unit may
cause an electric shock hazard.
It is essential to observe the following items:
G
The units are suitable for indoor use only. Protect
them against dripping water and splash water, high
air humidity, and heat (admissible ambient temper-
ature range 0 – 40 °C).
G
Do not place any vessels filled with liquid, e. g.
drinking glasses, on the units.
G
Do not set the splitter into operation, or immediately
disconnect the power supply unit from the mains
socket if
1. there is visible damage to the power supply unit
or to the splitter,
2. a defect might have occurred after a drop or sim-
ilar accident,
3. malfunctions occur.
The units must in any case be repaired by skilled
personnel.
G
For cleaning only use a dry, soft cloth, never use
chemicals or water.
G
No guarantee claims for the units and no liability for
any resulting personal damage or material damage
Reproducer 4
Reproducer 3
®
Copyright
®
HDMI-104
DC/5 V
DC INPUT
3
will be accepted if the units are used for other pur-
poses than originally intended, if they are not cor-
rectly connected or operated, or not repaired in an
.
expert way.
If the units are to be put out of operation
definitively, take them to a local recycling
plant for a disposal which is not harmful to the
environment.
3 Applications
The HDMI signal splitter can pass on the signals of a
player with HDMI to four reproducers with HDMI. The
splitter is compatible with the standard HDMI 1.3b.
HDMI: High Definition Multimedia Interface = multimedia
interface for signals with high resolution
4 Connection and Operation
1) Connect the player to the jack "Input" (4) and the
reproducers to the jacks "Output" (5) – also see
fig. 3.
2) Connect the supplied power supply unit to the
jack "DC/5 V" (3) and to a socket (100 – 240 V~/
50 – 60 Hz).
3) Switch on the HDMI signal splitter with the switch
"Power" (2). The LEDs "Output" (1) light up when
the corresponding reproducers are switched on.
4) After operation switch off the splitter with the switch
"Power". If the splitter is not used for a longer period
100–240V~
Power supply unit
5V4
DC/5V
DC INPUT
HDMI-104
©
by MONACOR INTERNATIONAL GmbH & Co. KG, Bremen, Germany. All rights reserved.
Order No. 06.7420
Output 1
Output 2
Output 3
Output 4
1
Input
4
Player
Input
Output 4
Output 3
Output 2
1X4
HDMI
Splitter
Output4
Output3
Output2
5
of time, disconnect the power supply unit from the
socket. It has a low power consumption even if the
splitter is switched off.
5 Specifications
Input jacks and output jacks: . . HDMI jack, type A,
Power supply: . . . . . . . . . . . . . 5 V via supplied
Ambient temperature: . . . . . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . . . . . 270 × 47 × 190 mm
Weight: . . . . . . . . . . . . . . . . . . . 1.5 kg
Subject to technical modifications.
Output 1
Reproducer 1
Reproducer 2
Power
Œ
2
Output1
19-pole
power supply unit
connected to
100 – 240 V~/
50 – 60 Hz/20 VA
Ž
A-0917.99.01.12.2008
Werbung
