Basic Parameter - Innokin iTaste SVD Gebrauchsanleitung

Please keep out of reach
from children and pets.
WARNING:
Please read the instructions and precautions before using the iTaste
SVD.
1. iTaste SVD is intended for use by persons of legal age, not by
non-smokers, or by children, women who are pregnant or
breastfeeding, or person with or at risk of heart disease, or taking
medication for depression or asthma. iTaste SVD is neither intended
for marketed as a quit smoking aid or cessation device.
2. This unit may include small parts, please keep out of reach of
children and pets.
3. Don't abuse your iTaste SVD even though it's made of stainless steel,
you may damage it by dropping it.
4. Don't attempt to repair the unit by yourself as damage or personal
injury may occur.
5. We recommend you use IMR high drain 18650, IMR high drain
18500 or IMR high drain 18350 batteries, such as AW IMR18650,
IMR18500 and 18350 batteries. Other improper batteries may
damage iTaste SVD.
6. In order to guarantee the normal work of iTaste SVD and the effect
of smoking, we suggest that you charge in time when the battery
power below 10%.
7. In order to prolong the validity of iTaste SVD, please do not place it
in too hot or too cold environment.
8. Please obey local laws or regulations while vaping. If there are any
bans or potential dangers, please keep the battery locked.
9. iTaste SVD is not waterproof, please keep it dry.
10. Keep your iTaste SVD from sources of excessive heat.
11. Please don't drop, hit or beat iTaste SVD, or you may cause damage
to outer shell or Inner components.
12. Please don't insert the battery backwards; otherwise no vapor will
be produced.
13. Innokin is not responsible for battery explosion due to the use of
low quality battery; Innokin iTaste SVD doesn't come with any
batteries.
Warranty
Please consult with Innokin official distributors for their warranty and
return policy. Innokin's warranty does not apply to products purchased
through third party vendors.
EN-1
Downloaded from www.Manualslib.com
Do not immerse battery in
liquid, fire, or extreme heat.
manuals search engine

BASIC PARAMETER

Dimension: (109.7-139.7) *Φ23.5mm
Material： Stainless Steel
Maximum Current Output: 5.0 Amperage
Operating Voltage: 3.0V-6.0V
Operating Wattage: 3.0W-15.0W
BRIEF FEATURES
- Variable Voltage: voltage can be adjusted from 3.0 – 6.0 volts in .1
volt increments.
- Variable Wattage: Wattage can be adjusted from 3.0 – 15.0 W in .5
watts increments.
- Short Circuit Protection.
- Reverse Battery Protection Circuit.
- Battery Voltage Detection.
- Resistive Load Detection ( Ohms meter ).
- ON/OFF battery switch.
- LED Battery Power Display.
- Low Voltage Warning.
- Overtime Vaping Warning.
- Telescopic Tube supports 18350, 18500 or 18650 batteries.
- Battery safety protection.
- Myriad compatible ( Thread fits iClear10, iClear16, iClear30, CE4,
CE5, eGo, T2, T3, VIVI NOVA, 510, etc ).
- Change battery and switch VV or VW have parameter memory
function.
- Built-in 3 digit display (Ohms meter, Volts /Watts, Atomizer voltage
output).
OPERATION GUIDE
"+" button
" " button
"-" button
Display
"+" button
"-" button
EN-2