Renkforce 1368984 Bedienungsanleitung Seite 2

G Operating instructions
4-Port USB Switch
Item no. 1368984
Intended use
The USB switch is used to manually switch among up to four PCs on one USB device. This
may be a single USB device such as, for example a USB scanner or a USB hub into which
several devices are plugged.
The switch means that inconvenient reconnecting of the USB device is no longer neces-
sary; activating a push button is sufficient.
The safety instructions must be observed at all times!
Any use other than that described above could lead to damage to this product and involves
the risk of short circuits, fire, electric shock, etc. No part of the product may be modified or
converted!
This product complies with the applicable national and European requirements. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package contents
• USB switch
• USB cable
• Operating instructions
Safety instructions
Damages caused by failure to follow these operating instructions will void the
warranty/guarantee! We do not assume any liability for any resulting damage!
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions! In such
cases, the warranty will be null and void!
• For safety reasons, any unauthorised conversion and/or modification to the
product is not permitted. Do not disassemble the product.
• The product is not a toy and should be kept out of the reach of children!
• The product must not get damp or wet.
• Do not carelessly leave the packaging material lying around, since it could be-
come a dangerous plaything for children.
• If you have any questions that are not answered in this manual, please contact
our technical service or another specialist.
Connection
• Connect each of the four square USB connectors type B (labelled "A", "B", "C" and "D")
to a free USB port of a PC (for example port "A" with a desktop computer and port "B" to
a notebook).
• Plug your USB device (for example, a USB printer) into the rectangular USB type A con-
nector (labelled "I/O").
Connecting a USB hub (not included) to the USB-A connector, allows you to share
more than one device.
Operation
Press any of the push buttons (A, B, C or D) at the front. A connection between the particular
PC and the connected USB device takes place over a mechanical switch inside of the USB
switch.
The push button, pushed in previously, will pop out automatically and the USB
connection is disconnected.
Important!
Press only one push button at a time!
Activating several push buttons at the same time may cause malfunctions. Basi-
cally, a USB device can only be operated on one PC and never simultaneously on
two or more PCs.
Tips & notes
• The USB switch saves you the hassle of inconvenient plugging in and out of USB cables,
if you intend to use a USB device alternately on more than one PC.
This also protects the sensitive USB connections of the PCs and the USB device.
• The cable length between the PC and the USB device should not exceed 5 m. The USB
switch does not count here. That means, if a cable from the PC to the switch is 3 m long
and more 3 m lead from the switch to the USB device, it makes a total of 6 m, which is
usually too much for a stable USB data connection.
Use shorter USB cables if there is an issue with the detection of the USB devices.
If an especially long USB wiring is required (for example, in a large office), use
an active extension cable (this contains special amplifier electronics for the USB
signals).
• The switch is designed for USB 2.0/1.1 devices. Connecting a USB 3.0 device delivers only
USB 2.0 speed for the data transmission.
• No driver and no power supply are required, because the USB has no integrated electron-
ics. The USB switch can be used with any operating system.
Disposal
The product must not be disposed of with the household waste.
Dispose of an unserviceable product in accordance with the relevant statutory
regulations.
Technical data
Numbers of switchable PCs .................4 (each USB connector Type B)
Number of USB ports for USB device ...1 (USB connector type A)
If you connect a USB hub (not included) to this USB port, you can, of course,
share more than one USB device.
USB standard...........................................USB2.0 (backwards compatible to USB 1.1)
Switch function ......................................manual via 4 push buttons
Ambient conditions ................................. Temperature 0 °C to +40 °C, air humidity 20% to 80%
Dimensions...............................................120 x 77 x 24 mm (W x D x H)
Weight .......................................................162 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
relative, not condensing