Air Live KVM-102UA Bedienungsanleitung Seite 5

There are three methods to control your KVM Switch for PC and Audio/Mic
channel selection: using (1) the front-panel push button, (2) a hotkey
sequence or (3) the KVM Switcher Software.
Face-panel button
The face-panel button allows you a direct control over KVM switching
operation. Simply press the button to switch to the next connected PC and
audio/mic channel (if binding is enabled). By default, PC port switching and
audio/mic port switching are bound together.
You can use the front panel button to switch to an empty port that is
not connected with any computer. Normally, if you use keyboard hotkeys
or the KVM Switcher software, you will not be able to switch to an empty
port.
Keyboard hotkeys
User-definable hotkeys for PC selection:
Hotkey sequence = Ctrl + Alt + [command key]*
* Please refer to next section for keys that are qualified to be used as a command key
Universal hotkey for PC toggle-switching:
hotkey, Ctrl + Alt + [command key] WILL NOT allow you to switch to an
empty port that is not connected with any computer. To force your KVM to
switch to an empty port, just press the front-panel button to switch.
Universal Hotkey sequence = ScrLk + ScrLk
* For operating systems other than Windows, you can still use this special hotkey to
facilitate PC switching.
seconds. Otherwise, the hotkey sequence will not be validated.
OvisLinkCorp.
Downloaded from www.Manualslib.com
USB "KVM-in-the-Cable" Operation Quick Reference
Both the universal hotkey, ScrLk + ScrLk and the user-definable
Each keystroke within a hotkey sequence should be pressed within 2
KVM-102UA
manuals search engine
English
4
4