Air Live KVM-102UA Bedienungsanleitung Seite 4

The KVM Switcher Software supports only the Windows platforms. For
other platforms such as Linux or MacOS, you can still use the keyboard
hotkey - ScrLk + ScrLK - to switch PC.
Step 2: Connect the shared USB keyboard, mouse, monitor,
Step 3: Connect a set of the built-in KVM/Audio&Mic cables to a
Some older computers with USB interface might need to manually enable
the USB option in the BIOS settings before you can use any USB devices.
If your USB interface does not work, please check the USB option status in
the BIOS.
If you use Windows 95/98/SE and has not yet installed a USB mouse on
your computer, there might be an error message telling you that mouse is
not detected and prompting you to decide whether to ignore the same
message in the future, and yet you found there is no mouse movement to
disable this message....So it is suggested that you should installed your
USB mouse on your computer first, before connected it to this KVM Switch.
OvisLinkCorp.
Downloaded from www.Manualslib.com
speaker/headphone and microphone each to its port on your KVM
Switch.
computer's connectors. Connect another set of cables to another
computer. Now you can operate the KVM Switch immediately.
KVM-102UA
manuals search engine
English
3
3