Singer SP 1000 Bedienungsanleitung Seite 6

WATER POUR-IN
- Please make sure the plug has been pulled out.
- The iron should been power off.
- Carefully pour in the water to a maximum of 0.80L.
- When finished using, please clear all the water left.
- Please do not use the water with any chemical material.
DRY IRONING
- Even if with water in the water tank, the iron can also be used as dry iron. However,
if for a long time, please make sure the water tank is empty. And please turn off the
steam as well. When the constant temperature led is off, the iron reaches the ideal
temperature.
STEAM IRONING
- As the temperature tuner instruction, when the temperature tuner at its highest
position, it can only be steam ironing. Or the water will pour out from the iron bottom.
- Please insert the plug.
- Turn on the steam switch and the iron switch.
- Please wait for the steam led to turn on which indicating that it has reached the
ideal temperature. The led will turn on or off automatically to indicate whether the
temperature is ok or not.
- If the iron can not generate the steam, it indicates that the water is used up. For
continuing the ironing, please do as follow:
- Turn off the iron;
- Press the steam button on the iron, in order to empty the water tank and balance the
pressure. Keep press the button until there is no more pressure.
- Turn off the whole appliance.
- Open the valve and wait for a few minutes.
- Then pour in 0.80L water to the water tank.
- Close the valve. Turn on the iron. Wait until the steam led turns on, continue the
ironing.
CLEANING
- If the iron bottom is dirty or has other eye wrinkle, please use sponge and cotton cloth
to clean it. Please do not use any metal or detergent. For other parts of the iron, you
may use wet cloth to clean them.
- Before cleaning, please make sure the iron is completely cool down. Do not put the
iron and the base into water!
- In order to clean up the boiler furring, frequent cleaning using tap water should be
carried on. General speaking, the process should be repeated for two or three times.
MAINTAINING
- Pull out the plug.
- Press the spray button several times to clear up the water tank.
- The iron should be placed on the base surface
ENVIRONMENT PROTECTION ADVICE
After using the appliance, clean the appliance in order to minimize the environment
pollution. You should obey the environment protection regulation in your district. In most
situations, you can hand over the appliance to the local recycle station.
The warranty will be invalid under the following situation:
- Not follow the instruction of use all above.
- Not follow the instruction of maintaining. Do violent use to the appliance and cause
damage.
- Damage caused by the local electricity network.
- Any unauthorized repair for the appliance.
Considering the further development and improvement of the function and design for the
product, we reserve the rights to modify the products without any notice.
4
_Instruction Manual.indd 4
WARNING! DO NOT OPEN THE VALVE WHILE THERE IS PRESSURE
IN THE WATER TANK!!
30.03.2012 11:34