Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Card reader CR53E-Apple
Item no. 1533267
Intended use
The product is used to read and write microSD cards. The product is suitable for connection to
an iPhone/iPad with a Lightning connector or to a USB port of a computer.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits or fire. Read the instructions carefully
and store them in a safe place. Make this product available to third parties only together with
its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Card reader
• USB-A to Micro-USB cable (15.5 cm)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Always observe the safety and operating instructions of any other devices which
are connected to the product.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
a) Inserting/removing a memory card
• Insert a microSD card into the card slot. Hold the product so that the card slot is located on
the right. The contacts of the microSD card must point downwards.
• Gently push the memory card into the housing until you hear a click.
• To remove the memory card, press it again carefully into the housing to release it.
b) Connection to an iPhone/iPad
• Connect the product to your iPhone/iPad.
• Download the free app "iStickPro 3.0".
• A warning message will appear when you open the app for the first time. Tap on "Allow".
• Tap the appropriate button to go to the desired file. Follow the instructions on the screen.
Button
Directory
Purple
App-internal memory
Orange
microSD card
Rose
iPhone/iPad memory
Green
iPhone/iPad address book
• To access the app's settings menu, tap on the gear icon.
c) Connection to a computer
• Connect the product via the provided cable to the USB port of a computer.
• Your operating system will automatically detect the card reader and display the inserted card
as a drive on the user interface.
Before removing a memory card from the card reader, it must be safely unmounted
on your computer to avoid lost or corrupted data and to prevent damage to the card
reader.
Notes
• The card reader (and the card) may be damaged if the card is not inserted in the correct
orientation.
• Never unplug the product or remove a card while data is being transferred. Risk of data loss
or file corruption.
Maintenance and cleaning
• Always disconnect the product from the iPhone/iPad or computer before cleaning.
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these could
damage the casing or cause the product to malfunction.
• Do not immerse the product in water.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be disposed of in household
waste. Always dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
System requirements .................... Windows
32 bit), Vista™ (32/64 bit), 7 (32/64 bit),
8.0 (32/64 bit), 8.1 (32/64 bit), 10 (32/64 bit), RT
Mac OS X 10.0 and above
Linux 2.6 and above
iOS 8.0 and above; Lightning connector
Suitable memory card ................... microSD (up to 128 GB capacity)
USB standard ............................... USB 2.0
Operating/storage conditions ........ -10 to +50 °C, 20 - 90 % RH
Dimensions (L x W x H) ................ 38 x 29 x 7 mm
Weight .......................................... 7 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
2000, XP (Home, Pro, with SP1, SP2, SP3, only
®
*1533267_V1_0317_02_IPL_m_en
Werbung
