Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
External Card Reader USB 2.0
Item No. 2201951
Intended Use
The product can be connected to a computer's USB port. It is designed for reading and writing
to appropriate memory cards.
It is intended for indoor use only. Contact with moisture, e.g. in bathrooms, must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can result in short circuits or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Card reader
• USB connection cable
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
Operation
a) Features
• USB 2.0 (backwards compatible with USB 1.1)
• Capable of reading different types of memory cards
b) Connection
Switch on your computer and wait until the operating system has booted completely.
Connect the card reader to a free USB port on your computer or a USB hub. The drivers are
already included in Windows
(minimum requirement XP). Windows
®
the card reader and installs all the necessary drivers. Windows
additional drive letters.
c) Disconnecting the Card Reader
If a read/write access is underway to the memory card, wait until it is finished.
Carefully remove the memory card from the card reader, the card reader can be then
disconnected from the computer.
If the memory card is extracted during a read/write access, the data on the memory
card can be damaged. It is possible that the memory card has to be formatted again
afterwards.
d) Reading/Writing to Memory Cards
The memory card is integrated into the system in same way as a conventional removable
media drive.
With Windows
file manager you can now read the data on the memory card (or store data on
®
the memory card), in the same way as you use the hard disk or a USB stick.
e) Tips & Notes
• Ensure that the read-only access (slide switch on the memory card; if available) is in the off
position, when deleting from, or writing to, SD/MS memory cards.
• Use preferably a USB 2.0 port for connecting the card reader.
The maximum data rate used by USB1.1 is only 800 kByte/s.
With USB 2.0, more Mbyte/s are possible, depending on the speed of your memory card!
Therefore, for fast transfer, you should always use a USB 2.0 port for the card reader
(a tremendous saving of time during data transfer!).
Care and Cleaning
• Disconnect the product from the mains and connected devices before each cleaning.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as
they can cause damage to the housing and malfunctioning.
• Clean the product with a dry, fibre-free cloth.
• Do not immerse the product in water.
Disposal
Product
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
automatically recognizes
®
automatically assigns
®
*2201951_V1_1219_02_mxs_m_en
Werbung
