Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Quartz wall clock
Item no. 1299496
Intended use
This product is designed to hang on the wall and show the time and date. It is intended for indoor
use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be avoided under
all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you
use the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuiting, fire, electric shock etc. Read
the instructions carefully and keep them. Make this product available to third parties only together
with its operating instructions.
This product complies with the statutory national and European requirements. All company names
and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Quartz wall clock
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on proper
handling in this manual, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed if
the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Do not open/dismantle the product (except for inserting/changing the battery as
described in the instructions).
• Correct polarity must be observed while inserting the (rechargeable) batteries.
• (Rechargeable) batteries should be removed from the device if it is not used for a long
period of time to avoid damage through leaking. Leaking or damaged (rechargeable)
batteries might cause acid burns when in contact with skin, therefore use suitable
protective gloves to handle corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not leave
(rechargeable) batteries lying around, as there is a risk that children or pets may
swallow them.
• All (rechargeable) batteries should be replaced at the same time. Mixing old and
new (rechargeable) batteries in the device can lead to (rechargeable) battery
leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire.
Never recharge non-rechargeable batteries. There is a risk of explosion!
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
a) Inserting/changing the battery
• Insert the battery before first use or change the battery when the clock frequently loses time
or stops working.
• Insert a 1.5 V/DC AA battery with correct polarity into the battery compartment (observe plus/+
and minus/-). The clock starts working immediately.
• Operating instructions
In principle, it is possible to operate the clock with rechargeable batteries. Due to
the lower voltage (rechargeable battery = 1.2 V, conventional battery = 1.5 V) and
lower capacity of rechargeable batteries, the battery life is shorter compared to
conventional batteries. If you wish to use rechargeable batteries in spite of these
limitations, you must use special NiMH rechargeable batteries with low self-discharge.
We recommend that you use high quality alkaline batteries to ensure prolonged and
safe operation.
b) Mounting
• The clock is designed to be hung on a wall. Use the hook on the back of the clock to hang it on
the wall.
Ensure that no existing cables or pipes (including water pipes) are damaged when
drilling mounting holes or securing screws.
• Secure the clock in place using a screw that protrudes a few millimetres from the wall. Then
hang the clock on the screw using the hook.
• The hands on the clock are protected by a cover. Handle the clock with care when hanging it on
the wall. Do not hang any objects on the clock.
Setting the time and date
2
• On delivery, the clock is set to 12 midday.
• Turn the setting ring (1) on the back of the clock in an
anticlockwise direction to set the desired date.
• Turn the setting ring underneath (2) on the back of the
clock in an anticlockwise direction to set the desired day
of the week.
• Set the desired time using the setting wheel (3) on the back
of the clock.
1
3
The clock does not adjust the date automatically for varying month lengths. If there are
fewer than 31 days in a month, set the correct date between 6am and 6pm on the 1st
day of the following month.
Maintenance and cleaning
Never use aggressive and abrasive detergents, rubbing alcohol or other chemical
solutions, as these could damage the housing or even impair the functioning of the
product.
• The clock does not require any maintenance apart from changing the battery, therefore do not
dismantle it.
• Remove the battery before cleaning. Only clean the clock using a clean, soft and dry cloth. Do
not press too hard on the surface when cleaning to avoid scratch marks. Dust can be easily
removed using a clean and soft brush.
Disposal
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
If a (rechargeable) battery is inserted, remove it and dispose of it separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ................................................1 x 1.5 V/DC AA battery
Battery life .....................................................about 12 months (alkaline battery)
Operating/storage conditions ....................-10 to +50 °C, < 90 % RH
Dimensions (Ø x H).......................................36 x 4.5 cm
Weight ............................................................1.06 kg (without batteries)
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE.
V1_0415_02-DS
Werbung
