Conrad TBS Crossfire Micro TX V2 Bedienungsanleitung Seite 2

TBS Crossfire Micro TX V2
Item no. 2300466
Intended use
This product is solely designed for private use in the field of model making and the operating
times associated with it. This system is not suitable for industrial use.
This product can be used indoors and outdoors. Make sure the product stays dry.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
In addition, improper use can cause hazards such as short circuiting, fire, electric shock etc.
Read these important notes and the operating instructions of your product carefully and keep
them. Make this product available to third parties only together with these important notes and
its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
You are solely responsible for the safe operation of the product.
This product is not a toy and not suitable for children under 14 years of age.
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Transmitter Compatibility Chart
This table serves as a guide only. Depending on product updates and modifications, some of the listed information may be outdated. Before you use the product, you are strongly
requested to read up on the latest information on using products of this kind in combination with your transmitter model. Conrad Electronic CE does not take any responsibility for
product/persons damage resulting from the use of this product.
Manufacturer
TBS TANGO
FrSky Taranis
FrSky Q X7, X10S, X12
FrSky X10
Turnigy 9XR
Spektrum DXe, DX6 - DX20
Spektrum iX12
Graupner MX12 - MX24
Graupner MZ12 - MZ24
Futaba T18SZ and T16SZ
All Futaba transmitters
QR ( A )
JR Bay External power
supply required
QR ( B )
Declaration of Conformity (DOC)
The manufacturer hereby declares that this product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number
in the search box. You can then download the EU declaration of conformity in PDF
format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product according to
the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Safety-relevant technical data
Transmission frequency................ 863 – 870 MHz
Transmitter range ......................... 15 km
Transmission output ..................... 10 mW
PPM CRSF RC CRSF
Telemetry
*
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Note
Modification required for full speed (400,000 baud).
Scan QR (A) and read instructions.
If the 3-pin 3.5 mm jack connector is used, swap white
and red wire.
*With firmware update
*
*Scan QR (B) and read instructions.
*2300466_v1_0920_02_jc_ss_de_en