Blaupunkt BA32O173B1BKPE427 Bedienungsanleitung Seite 40

Getting started - initial set up
1
2
3
First time installation
4
Wlcome to setup wizard
Language
Country
Environment Ecohome
1) Connect an RF cable from the TV's RF-in input to your
TV Aerial socket
2) Select required language and country.
3) Press OK on remote control to start auto tunning
Start
OK
Auto Tuning
5,6 *
Country
Digital Type
Scan Type
Network ID
Frequency
Symbol Rate
Start
OK
MENU
Auto Tuning Status
7
Analog Channels found
Digital Channels found
Radio Channels found
Data Channels found
Congratulation you have completed
the tuning process. Press OK to EXIT.
EXIT
OK
40
1.
Using the RF cable supplied, connect the TV to the TV Aerial wall socket (Fig A).
Connect the power cable to the Electrical outlet (Fig B).
2.
Turn on the device with marked ON/OFF switch
3.
Insert the batteries supplied into the Remote control and press the Standby
button to power on the TV.
4.
You will now be welcomed with the initial set-up screen. If it does not appear, on
the remote control, please press [MENU] then 8-8-8-8 and the menu will appear.
As part of our continuing eff orts to reduce energy consumption, we added a
new Ecohome feature (appears on the screen fi rst installation). This function
helps reduce energy consumption up 15% compared to other modes. The
image brightness is reduced using Ecohome mode. If this setting does not suit
your environment, you can choose from other modes
Note: the professional mode is the optimal default mode, but consumes
15% more than the Ecohome)
Select your language, country and environment.
Press OK on the remote control and tuning will start.
5.
In the next step select your digital boradcasting type. You can choose between
DVB-T and DVB-C*. The analog section will be searched automatically, since
most cable networks includes analog channels.*
STANDB Y
6.
Select DVB-C if your TV is connected to a broadband cable network. Keep all
default settings as possible. Then press [OK] button to start search.
TV/RADIO TV GUID
If DVB-C channels are not found, contact your network provider for the valid "Net-
ATV
work ID". Then perform a new search. Press the [MENU], select "Automatic Channel
Search" and enter here the inquired network ID. Start your search with the [OK]
button. *
7.
After completion of the following channel search screen is displayed:
Sollten einzelne Sender nicht gefunden werden, kann die Ursache an einer zu
geringen Signalstärke oder Qualität liegen. In diesem Falle könnte der Einsatz
eines Antennenverstärkers oder einer aktiven Antenne von Nutzen sein. Nach einer
English
entsprechenden Aufrüstung führen Sie bitte eine erneute Kanalsuche durch. Hierzu
UK
siehe >>Menü Programmkanäle.
Exit
Denmark
DVB-C
Tip:
Network Scan
Auto
Auto
Auto
Back
nels/ programmes) you will need to increase the signal reception in order to
receive all of the channels available. The most economical way to do this is by
10
purchasing and connecting a 'signal booster' in between the TV and the TV
10
aerial socket. If this does not solve the problem, you will need to upgrade the TV
5
aerial to a digital hi-gain compatible aerial
1
* - only for models with DVB-C tuner
If the TV fi nds some, but not all, of the Digital channels, the TV is
functioning correctly but the signal being received is not strong
enough. (The signal strength needs to be above 85% - you can see
the signal strength the TV is receiving when you change chan-