Herunterladen Diese Seite drucken

Mous AutoAlignPlus Bedienungsanleitung Seite 4

Wireless charging (15w)
LED Indication Key
• White LED flashes twice: correct power has been plugged into the board
• Solid white light: product is connected to charger
• No light: product on standby
• Constant flashing white LED light: input voltage instability/voltage stringing between circuits
• We recommend you unplug your charger
• Make sure you're using the Mous adapter that came with your wireless charger
• If there's still a problem when using the Mous adapter please contact us
• Flashing red LED light: over voltage/low voltage/over current/over temperature/foreign object detection/circuit failure
• Please check for foreign objects and remove if found
• If this doesn't sovle the problem, unplug your charger and contact us
Important Safety Instructions - Warning
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess
heat, toxic fumes, fire or explosion, for which damages you ("Purchaser"), and not Mous Products Ltd. ("Manufacturer") are
responsible.
X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or other forms of heat,
as this may reduce charge e ciency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat may cause explosion.
X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the Limitless 3.0 Wireless Charger
within 20 cm radius of their implanted device as it may cause interference.
X Do not expose the Wireless Charger to water. Exposure to water may result in short circuiting. If short circuiting occurs
immediately turn o at the wall.
X Do not use the wireless charger in excess of its output rating. Overloading outputs above rating may result in a risk of fire or
injury to persons.
X Do not disassemble this product or attempt to repurpose or modify it in any manner.
X Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void of warranty.
X Use of a power supply or charger not recommended by Mous may result in a risk of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible for providing
supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or
damages arising from unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you find that your device is excessively hot, is
emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all
product use and contact Manufacturer.
X Switch o the wireless charger when not in use.
X To disconnect the charging pad from line voltage, pull the AC adapter from the AC outlet.
X To comply with FCC RF exposure compliance requirements, the wireless charger must be used with a separation distance of at
least 20 cm from all persons.
Legal
This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine
whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device
incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third party may su er as a
result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the
appropriate device for which this product is designed. Manufacturer will not be responsible for any damages you or any third
party may su er as a result of misuse of this product as outlined above. Purchaser agrees to defend, indemnify, and hold
Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with an unintended
loading

Diese Anleitung auch für:

A448A471A472