Mous AutoAlignPlus Bedienungsanleitung Seite 3

Wireless Charger Suction Mount (A472)
AutoAlignPlus™ Wireless Charging
Before Use
• Please read this guide before using the device in order to ensure safe and proper use
• Please consult your device packaging to determine whether this product is compatible with your device.
• Your consumer rights are governed by the law of the country in which you purchased the product. Please contact your service
provider for more information.
What's In The Box?
A
C
Wireless Charger Suction Mount
A
18W USB-C out 12V car adapter
B
USB-C to USB-C charge cable (1.5m)
C
How To Set Up Your Wireless Charger Suction Mount
1. Plug the car adapter into the car socket
2. Plug the cable provided into the car adapter
3. Lift the lever on the suction cup
4. Place the suction mount in the desired location against the windscreen
5. Lock the suction cup in place by pushing the lever down
6. Orient the charging head to the desired angle by moving the Mous tab and tightening the nut on the back of head
7. Plug the other end of the cable into the charger. Two white flashes from the LED indicates that the product is on
8. Place your phone onto the mount, the magnets will automatically align your phone to the mount and will begin charging
How To Safely And Best Use Your Wireless Charger Suction Mount
• If you're using an accessory with your phone case, for example a Mous Card Wallet, please remove it as it may a ect the
connection between your case and the mount and the charge performance
• Limitless 3.0 contains magnets to allow perfect fast charging every time. Ensure magnets snap to position otherwise your mobile
device may not charge properly
• Ensure there are no metallic objects between the charging mount and your phone as this may interfere with the wireless
charging
• For best charging performance, we recommend you use the Mous supplied adapter and cable
B
Material top
AutoAlignPlus magnets
Charging coil
Indicator light
Tightening nut
Charger port (Type-C)
Locking lever
Suction cup