Getting Started; Connection And Preparation; Connecting To The Network; Connecting The Headphones - Grundig DTR 7000 Bedienungsanleitung

GETTING STARTED

Connection and Preparation

Connect to the speaker and power socket using
the AC adaptor. Switch on the device, it starts up.

Connecting to the network

Power on your device and connect to a wire-
7
less access point, router or similar network de-
vice.
The network device needs to support WiFi
7
(802.11 a/b/g/n) wireless connection.
Make sure you have setup the wireless network
and you have the WEP, WPA or WPA2 security
password to activate the connection. You may
also use the WPS (WiFi Protected Setup) function
for easy pairing between the network device and
DTR 7000 2.1 BT DAB+ WEB. Check if the light
indicators on the network device are in appropri-
ate status.
Using CDs
The device is suitable for music
CDs displaying the logo shown
here (CDDA) and for CD-Rs and
CD-RWs with audio data. You
can play standard 12 cm CDs
on your device. The radio is able to play CD-R
and CD-RW discs containing MP3 and WMA
files. It is assumed in this section that a file is
equivalent to a CD track.
An MP3 / WMA CD may not contain more than
999 files and not more than 99 folders. MP3
and WMA files should be created with standard
audio sample rate of 44.1kHz.
MP3 and WMA data rates up to 320 kilobits per
second are supported. WMA Lossless files are
not supported. The unit will not play files which
include digital rights management (DRM) protec-
tion. When burning CD-R and CD-RW discs with
audio files, various problems may arise which
could lead to problems with playback. Typically
such problems are caused by poor CD writing
or audio encoding software, or by the hardware
settings of the PC's CD writer, or by the CD being
used. Should such problems arise, contact the
customer services of your CD writer or software
manufacturer or look in their product documen-
tation for relevant information. When you are
making audio CDs, take care to observe all legal
26 ENGLISH
------------------------------------------------------------------------------------------------------
guidelines and ensure that the copyright of third
parties is not infringed.
Connecting a USB memory stick
Insert the USB plug of a USB memory stick into
the USB port at the back of the device. The sys-
tem of the USB must be FAT 16, FAT 32. It is not
compatible with NTFS or other systems.
Connecting an audio source
via AUX in
Use a standard 3.5mm audio cable to connect
the audio output from the external device to the
audio input sockets on the back of the device.

Connecting the headphones

Turn the volume down before using the head-
phones.
Inset the headphone plug (standard 3.5mm) into
the headphone socket at the front of the device.