Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A
.
Wall Mounting:
Step 1: Identify a mounting location and place the
Step 2: Use a 4/16"drill bit to drill holes at 2 marked
Step 3: Tap the plastic anchors gently into the hole
Step 4: Use a screwdriver to secure the screws into
Step 5: Place the antenna base over the screw and
B.
Magnetic Mounting:
Step 1 : Identify a mounting location which is
C
.
Desktop:
Downloaded from
www.Manualslib.com
Mounting the Antenna (optional)
sticker on.
places on sticker.
by using a rubber mallet or hammer.
the plastic anchors.
Be sure to leave enough space so the antenna
base will slide over the head of the screw.
slide it into the locking position.
available for magnetic using.
For example: Office partition, white board,
etc.
Be sure not to place antenna onto monitor,
hard disk, notebook, etc.
manuals search engine
D.
Attach to AP/Router:
3
Werbung
Inhaltsverzeichnis
