Programming With Alexa (With Or Without A Smart Speaker) - THOMSON PLUG-O Bedienungsanleitung

Presence simulation
You will need to create a switching on and switching
off routine at different times.
5 - USING WITH AMAZON ALEXA
The Amazon Alexa Assistant can help you control
your connected devices.
For example, you can use the following commands:
- "Alexa Turn off the office lamp"
- "Alexa" Activate the office lamp
Download and install the Amazon Alexa app from
the Play Store or Apple store.
Your devices must be paired on the Thomson
At Home app in order to be controlled with the
Amazon assistant. They must be connected on the
same WiFi network.
Installing the At Home skill
- In the Amazon Alexa app, press the menu at
the top left-hand side and select "Skills and
Games"
- Search for At Home in the list of skills or use
Search at the top right-hand side
- Select the At Home Skill and activate for use
- Enter the account used in the Thomson At
Home app
- Once the skill is correctly paired, press the
cross at the top left-hand side.
- The app will offer to search for devices. Press
Detect devices.
OUTDOOR WI-FI SMART PLUG
D - USING THE PRODUCT
Connect devices to Amazon Echo
• Using guided discovery to connect a home
automation device
- In the Amazon Alexa app, press the menu
at the top left-hand side and select Add a
device.
- Select the type of device you want to
connect.
- Select the brand and follow the instructions
on the screen.
• Using voice control to connect a home automation
device
- O nce a skill is installed, say "Alexa, find new
devices".
- After 45 seconds, Alexa will give you the
devices found.
For more information about Amazon Alexa, see
Amazon support.
One tip however: if you connect multiple modules
within the same zone, and to prevent unwanted
commands, we recommend you do not use the
group name suggested by Alexa (bedroom, office,
living room, etc.) when naming your control module.
In the event of problems with the Amazon Alexa
application or configuration of the device in Amazon
Alexa, contact Amazon support.
6 - PROGRAMMING WITH ALEXA (WITH OR
WITHOUT A SMART SPEAKER)
Download the Amazon Alexa app and install it.
The following information may vary depending on
updates to the Alexa app or your operating system.
Make sure that you have configured Alexa correctly,
and then launch the Alexa app.
Set up your Alexa account, even if you do not have
a speaker.
Install the Thomson At Home skill
EN
15