System Startup; System Software - Schenker A522 Ausführliches Benutzerhandbuch

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not exceed 135 degrees); use the other hand (as illustrated
in Figure 1) to support the base of the computer (Note: Never
lift the computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 7.
HDD RAID Support
Your hard disk(s) can be set up in AHCI mode or RAID
mode (for increased performance or protection). Note that
setting up your hard disk(s) in RAID mode needs to be
done prior to installing the Windows OS (see
on page 5).
Downloaded from www.Manualslib.com
RAID Setup
manuals search engine
135 ﾟ
Figure 1
Opening the Lid/LCD/Computer with AC/DC Adapter
Plugged-In

Shut Down
Note that you should
always shut your com-
puter down by choos-
ing Shut Down from
the Start Menu.
This will help prevent
hard disk or system
problems.
3