Blower Function; Finish Operation - Comet CM 12 S FREE Originalanleitung

HOW TO PREPARE AND USE VACUUM
CLEANER
Before you use your vacuum cleaner for the rst
time, you must charge the battery completely see
"Charging the battery".
Unplug the charger cord from the vacuum cleaner.
If the charger remains connected to both the
power point and to the appliance, the latter will
not function.
• The machine must be always kept on horizontal
bases, in a safe and stable way.
Never use the appliance without lters .
(see g.②) Insert the suitable lters for the pro-
per use.
Accessories and lter NOT suitable for ash suction
Accessories and lter suitable for ash suction .
• Make sure the lter N is tted in its housing .
• Use the most suitable accessories for the reque-
sted usage.
START UP
GREEN
To activate suction, press the main ON/OFF button;
the green LED turns on,
signalling that suction is at 50% (in energy saving
mode).
ORANGE
To increase suction to its maximum level, press
"MAX"; the orange LED turns on.
To deactivate suction, press the main ON/OFF but-
ton.
Next time you turn suction on, it will be again at
50% in energy saving mode.
12
HOW TO PREPARE AND USE THE ASH VA
CUUM CLEANER
Accessories and lter suitable for ash suction .
• Connect the metal hose F1 to its tting T .
• Connect the metal straight lance F2.
Before vacuuming the ash, check that it is cold
and no longer alight.
Do not vacuum burning embers
Do not empty the drum into a container which
is easily in ammable and make sure that the
ashes are completely cool.
• Vacuum the ash directly from the replace or
from the stove (wood or pellet-burning). Hold the
suction nozzle about 1 cm. above the ash.
If the metal hose becomes hot during use, turn the
device o immediately and let it cool.

BLOWER FUNCTION

Never use the appliance without lters
• Insert the suitable lters and accessories for the
proper use.

FINISH OPERATION

Turn on the appliance.
Completely empty the tank.
ARANCIONE VERDE