Special Safety Advice; Parts; Before First Use - Ideen Welt TXS-026 Bedienungsanleitung

29. DANGER O F BURNS! Parts of the device are very hot during use. Touch on the handles
only.
30. Danger of fire or electric shock: do not insert too big slices, metal foils or utensils into the
toaster.
31. FIRE HAZARD! BREAD CAN CATCH FIRE! Do not leave the device unattended. The
device must not come in contact or be covered with easily flammable materials, e.g. curtains,
textiles, walls, and similar. Make sure that the sufficient distance is kept to flammable
materials.
32. Always make sure that the room is properly ventilated.
33. In the event of fire, first disconnect the power plug from the socket or disconnect the device
from the power supply otherwise prior to undertaking a suitable action aimed at extinguishing
fire. CAUTION! Do not pour water on the still energised device: DANGER OF ELECTRIC
SHOCK!
34. The device must not be operated with an external timer or separate remote control.

SPECIAL SAFETY ADVICE

1. The heating plates and parts of the device are very hot. Allow the device to cool down
completely prior to cleaning or storing.
2. Make sure that the power cord does not come in contact with hot surfaces.
3. Use only synthetic or wooden utensils when inserting or taking the sandwiches out in order
not to damage the non-stick coating of the heating plates. Make sure that the utensils are not
pointed or have sharp edges.
This device is intended for private use only and must not be used for commercial purposes.

PARTS

BEFORE FIRST USE

• Remove all packaging materials.
• Check the scope of delivery for completeness and possible transport damages. Should the
lamp be damaged, or the packaging incomplete, contact your dealer.
• Remove the original packaging. It can be later used for transport or storage. Dispose of the
packaging material in an environmentally friendly way and according to the binding laws and
regulations. Keep it away from children.
• Unwrap the power cord (3) fully and guide it through the opening in the standing foot..
• Connect the power plug with an appropriate socket.
• Heat the device two to three times without food to remove production residues. Allow the
device to be switched on for approx. 5 – 10 minutes per heating cycle. Characteristic odour
Downloaded from www.Manualslib.com
1
2
2
3
4
manuals search engine
1. Locking device
2. Heating plates
3. Power cord with power plug
4. Handle
5. Green indicator lamp
6. Red indicator lamp
7. Standing foot
7
5
6
7