Preparing The Stihl Connected Box For; Operation; Preparing The Stihl Connected Hub For; Setting Up The Stihl Connected Hub - Stihl connected Box Gebrauchsanleitung

4 Preparing the STIHL connected Box for Operation
￭ If the STIHL connected Hub or the power adapter are not
serviced or repaired correctly, components may no longer
function properly or safety devices may be rendered
inoperative. This may result in serous or fatal injury to
people.
► Do not attempt to service or repair the STIHL connected
Hub and the power adapter.
► If the STIHL connected Hub or power adapter has a
malfunction or is damaged: Do not use the STIHL
connected Hub and contact your STIHL dealer.
4 Preparing the STIHL connected Box
for Operation
4.1

Preparing the STIHL connected Hub for

Operation

The following steps must be performed before starting up:
– Internet access is available within the range of the STIHL
connected Hub via one of the following:
– Connection via LAN socket (connection via Ethernet
cable)
– Connection via remote network
– Mobile Internet access
with the STIHL connected mobile Hub)
– For Internet access via LAN socket or remote network:
– The IP addresses from the router must be assigned
dynamically. Static IP addresses are not supported.
– The remote network connection must be password
protected. Open remote networks are not supported.
– For Internet access is via SIM card:
– The SIM card must be PIN protected. SIM cards with
PIN deactivation cannot be used. If no PIN is set: Assign
a PIN via smartphone.
1
Charges may be incurred from the download of data via a mobile
Internet access due to the amount of data involved. The STIHL
connected mobile Hub requires a permanent connection to the
Internet while it is running. Before using it, ask your provider for the
respective costs and charges.
0458-199-9921-A
1
via a SIM card (available only
– The user is registered in the STIHL connected portal, his
or her personal access data is known.
– The serial number of the STIHL connected Hub on the
rating plate is known.
4.2

Setting up the STIHL connected Hub

Before you can use the STIHL connected Hub, it must be
configured.
This icon refers to the graphs on the inside of the
package.
Preparing the STIHL connected Hub
► If you wish to use a mobile Internet access (available with
the STIHL connected mobile Hub only): Put the SIM card
into the slot.
► If you wish to connect to the Internet via the LAN socket:
Plug an Ethernet cable connected to the Internet into the
LAN socket.
Electric connection of the STIHL connected Hub
► Connect the cable and the matching mains plug adapter
with the power adapter.
► Insert the round plug into the socket.
► Insert the power adapter in a convenient wall outlet.
The STIHL connected Hub starts up and establishes a
remote network connection. The "Operating status" LED
flashes white. As soon as the "operating status" and the
"connection status" LEDs emit white light, the STIHL
connected Hub is ready for setup.
Establishing a connection with the remote network of the
STIHL connected Hub
► Scan the QR code on the rating plate with your
smartphone.
The connection to the remote network of the STIHL
connected Hub is established automatically.
► As a alternative, manually establish a connection with the
remote network of the STIHL connected Hub.
The access data is indicated on the rating plate.
English
1
3
2
15