General - Feig Electronic ID ZK.AB-A Montageanleitung

®
Identifikationssystem OBID
Montageanleitung ID ZK.AB-A

General

The compact access control system ID ZK.AB-A is a ReadOnly (RO)-terminal. Being a so-
called „stand alone"-device, it does not need to be connected to a PC or control unit. Apart
from RO-transponders, ID ZK.AB-A is also able to handle Read/Write (RW)-
transponders which are used in accounting-, locking- or other access control systems.
ID ZK.AB-A is able to manage up to 200 user transponders within their field of application
for the control of doors, turnstiles or gates. The transponders are programmed resp.
deleted individually with the help of the enclosed "Masterkarte". With the help of this
"Masterkarte" (also called factory "Masterkarte" in the following) you may even program or
delete a second "Masterkarte".
ID ZK.AB-A has an integrated relay, which may for instance trigger a usual commercial
door opener. The relay holding time is adjusted with the help of a "Masterkarte" and
ranges from 0,5 to 9 seconds.
Although ID ZK.AB-A disposes of an integrated antenna, an external antenna is also
available (ID ZK.ANT-A). Such an external antenna can be mounted at the outside of an
object and connected with the ID ZK.AB-A, which is located inside. Thus, the relay control
of a door, for instance, is located safely inside and protected against acts of sabotage.
Power supply may either be 12-24 V DC or 12-15 V AC.
ID ZK.AB-A and ID ZK.ANT-A generally come in a concealed housing. However, a
surface housing is available for both devices upon request.
FEIG ELECTRONIC GmbH M00500.0de-ID-B.DOC Seite 24 von 52