Hema 80005005 Gebrauchsanleitung Seite 4

use or use not in accordance with the requirements of this
manual.
11. Always remove the power cord and let it cool: Before
moving the unit; Before the unit is stored; Before you go
mounting or dismantle parts; Before cleaning or
maintenance work; After use.
12. Only have the appliance repaired by a qualified service
center.
Electricity and heat
1. Before use, check that the mains power supply voltage is
the same as the voltage indicated on the appliance.
2. Always plug the appliance into an earthed plug socket.
3. Regularly check the power cord for damage.
4. Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or is dropped or
damaged in any manner. Return appliance to manufacturer
or the nearest authorized service agent for examination,
repair or electrical or mechanical adjustment.
5. To remove the plug from the plug socket, pull the plug. Do
not pull the power cord.
6. Make sure the power cord does not come into contact with
hot surfaces or steam.
7. Always remove the plug from the plug socket before you
move the appliance.
8. The machine should not be operated by means of an
external timer-switch or by means of a separate system
with remote control.
9. To avoid a circuit overload, do not operate another high
voltage appliance on the same circuit.
10. To protect against electric shock do not immerse cord,
plugs, or housing in water or other liquid.
11. Do not touch the appliance if it falls into water. Remove the
plug from its socket, turn off the appliance and do not use
it again.
- 3 -