Renkforce CR48e USB3.0 Bedienungsanleitung Seite 2

Operating instructions
Card reader CR48e USB3.0
Item no. 1499584
Intended use
The product is designed to read and write suitable memory cards of various formats. It can be connected
to a computer via USB.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product
for purposes other than those described above, the product may be damaged. In addition, improper use can
cause hazards such as short circuiting, fire etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Card reader
• USB 3.0 cable
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions from our website www.conrad.com/downloads or scan the printed
QR code. Follow the instructions on the website.
Description of symbols
The symbol with an exclamation mark in a triangle indicates important instructions contained in
these operating instructions that must be followed.
The arrow symbol alerts the user to the presence of important tips and notes on using the
device.
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it
from any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Connection
• Connect the USB 3.0 cable's Micro USB B plug to the Micro USB port (5).
• Connect the cable's USB A plug to a free USB 3.0 port on your computer.
Notes
• The card reader is compatible with USB 2.0 and USB 1.1, but does not then work at USB 3.0 speed.
• Installation of a driver is not required.
• Observe the operating instructions of the computers to be connected in regard to the use of periphery
devices.
• For older operating systems: Some memory card formats (such as exFAT) might require the installation
of a system patch in order for the card reader to recognize the memory card. Refer to the operating
instructions and the latest update information of your operating system.
• The card reader or the card could get damaged if the card is improperly aligned and inserted.
• Never disconnect the product or remove the card during data transmission. There is a risk of loosing or
corrupting data.
• Properly eject the memory card from the card reader before removing it to prevent data loss, data
corruption or product damage. Observe the operating instructions of your operating system.
Slots/Reading cards
1 2 3 4 5
Compatible cards
Mini-SD / SD / SDHC / SDXC / SD HC II
MMC / MS-PRO-DUO / MS-MG / M2 / MS-PRO-MG / MS-ROW / Micro SD HC / Micro SD XC
CF
• Insert the memory card into the appropriate card slot after starting up your computer. The operating system
will show the memory card as a drive. You may now copy files.
• The control indicator (1) lights up when a card is inserted and flashes during data transfer.
All card slots may be in use at once.
Cleaning
• Remove the product from the computer before cleaning.
• Never submerge the product in water.
• Clean the product with a dry, fibre-free cloth.
• Do not use any abrasive or chemical cleaners.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the environment.
Technical data
Power supply ........................................ 5 V/DC (via USB), max. 900 mA
USB standard ....................................... USB 3.0 (downward compatible with USB 2.0/ USB 1.1)
Transfer rate ......................................... max. 5 Gbps
System requirements ............................ Windows
Vista™ (32/64 bit), 7 (32/64 bit), 8.0 (32/64 bit), 8.1 (32/64 bit),
10 (32/64 bit), RT
Mac OS 9 and higher
Linux Kernel 2.4.18 or higher
Cable length ......................................... 100 cm
Operating conditions ............................. 0 to +50 ºC, 0 – 90 % RH
Storage conditions ................................ -20 to +65 ºC, 0 – 90 % RH
Dimensions (W x H x D) ....................... 86 x 13 x 49 mm
Weight .................................................. 42 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represents the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
1 Control indicator
2 SD/MMC card slot
MS card slot
3
4 M2/microSD card slot
5 Micro USB port
CF card slot
6
6
XP (Home, Pro with SP1, SP2, SP3, only 32 bit),
®
*1499584_v1_1016_02_jh_m_en_(1)