Herunterladen Inhalt Inhalt Diese Seite drucken

Operation - THERMEx ID 30 V Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für ID 30 V:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 85
Figure 2. Electronic control board
Figure 2: 1 – LCD display, 2 – button «▲» Temperature control / increasing the
heating temperature, 3 – button «▼» Temperature control / decreasing the heating tem-
perature, 4 – button «on/off» / switch on/switch off, 5 – button «Heating mode» / setting
the heating power, 6 – "Smart" mode indication, 7 – indication «Economy» / minimum
power, 8 – indication «Optimal» / conventional power, 9 – indication «Turbo» / maxi-
mum power.
Switching on/switching off of the EWH is performed by pressing the central button
«on/off» (Figure 2, p. 4), while the display shows the preselected heating temperature.
After 2.5 seconds, the display shows the current water temperature in the EWH. Selec-
tion of the heating power is performed by pressing the button «Heating mode» (Figure
2, p. 5), on the control panel. Mode 2 kW is accompanied by the indication of a control
lamp «Turbo» (Figure 2, p. 9), 1,3 kW is accompanied by the indication of a control
lamp «Optimal» (Figure 2, p. 8), and 0,7 kW is accompanied by the indication of a
control lamp «Economy» (Figure 2, p. 7).
Switching on the smart mode "Smart" is accompanied by the indication of the indi-
cator lamp "Smart" (Fig. 2, item 6). In this operation mode EWH can study and record
user's habits in using hot water and prepare hot water in advance for the next water
cycle (7 days in a cycle). When users do not need hot water, it can maintain water at
minimum temper-ature. Thus comfort and saving of energy can be achieved. This mode
is used for those who use hot water on a regular basis.
During the operation of the EWH, the user can adjust the temperature of the water
heating using two buttons «▲» «▼» Temperature control (Figure 2, p. 2 and p. 3).
If you do not use the EWH in the winter time and there is a possibility of freezing
of the main waterways and the water heater itself, it is recommended to turn off the
power and drain the water from the EWH in order to avoid damage to the inner tank.

10. OPERATION

EN
ы
7

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Id 50 vId 80 vId 100 vId 50 hId 80 h

Inhaltsverzeichnis