Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
OTG card reader
Item no. 1218944
Intended use
This product describes and reads micro SD memory cards. The card reader can be
connected to a PC with a USB connection or smartphone and tablet which use a
corresponding android operating system and micro USB connection.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product may
be damaged. In addition, improper use can cause hazards such as short circuiting,
fire, electric shock etc. Read the instructions carefully and keep them. Make this
product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Card reader
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in these operating instructions, we assume no liability
for any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• It is intended for indoor use only. Do not use it outdoors. Contact with
moisture, e.g. in bathrooms, must be avoided under all circumstances.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Also observe the safety and operating instructions of any other devices
which are connected to the product.
• Consult a professional if you require assistance with product operation,
safety or connection.
• Maintenance work, adjustments and repairs may be carried out only by a
professional or at a specialist workshop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operation
This product does not connect a smartphone and PC. Only use one of the
USB plugs at a time.
• Open the protecting caps of the USB plug on the card reader.
• Push the button on the card reader in the direction of the micro USB plug. Plug a
micro SD card into the free plug-in location at the USB A plug. The plug-in location
features a notch on the USB A plug. Do not forcibly insert the disk! Only one direction
is correct. Please ensure that the contacts of the micro SD card point downwards.
• Connect the USB A plug of the card reader to a free USB 2.0 port of your computer
or connect the micro USB plug to the micro USB socket of your android smartphone
(from android version 4.x). The operating system automatically recognizes the card
reader and presents the inserted card as conventional removable media drive.
• The LED of the card reader lights up as long as the card reader is connected.
• Wait until read/write access to the memory card is complete.
• Then you can carefully remove the memory card. If the memory card is pulled out
during a read/write access (or the card reader is unplugged from the computer/
smartphone), the data on the memory card can be damaged. It may also be
necessary to format the card in this case.
• Push the button on the card reader in the direction of the micro SD card to remove
the micro SD card from the card reader. The micro SD card can then be removed
from the plug-in location.
• Disconnect the card reader from the connected device if it is not in use and cover
the plug with the protective caps.
Please note that with some operating systems the card reader must be first
disconnected from the PC/smartphone via the operating system, before it
can be unplugged.
Micro SDXC memory cards are supported up to a memory size of 64 GB
with Windows
and MAC operating systems and up to 32 GB with android
®
operating systems.
Maintenance and cleaning
• Disconnect the product from the power supply before cleaning (USB port).
• Besides occasional cleaning, the device is maintenance-free. Use a dry, soft, anti-
static and lint-free cloth for cleaning.
• Do not use any abrasive or chemical cleaners.
• Never submerge the product in water.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product in accordance with
applicable regulatory guidelines.
You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical data
Operational voltage/ current .............5 V/DC, max. 500 mA (via USB)
Connection standard ..........................OTG support (on-the-go), USB 2.0
Suitable memory cards ......................Windows
Supporting operating systems .......... Windows
Operating conditions .........................0 to +60 °C, 20 - 80 % rF
Storage conditions.............................. -20 to +60 °C, 10 - 95 % rF
Dimensions (W x H x D)......................36 x 8 x 17 mm
Weight ...................................................approx. 3.3 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represents the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
and MAC operating systems:
®
microSD, microSDHC, microSDXC up to 64 GB
Android operating systems:
microSD, microSDHC up to 32 GB
XP (Home, Pro, with SP1, SP2, SP3),
®
only 32 Bit, Vista™ (32/64 Bit), 7 (32/64 Bit),
8, 8 Pro, 8.1, Mac OS X 10.5 and higher,
Android from Version 4.x
V1_0914_02_HK
Werbung
